15 open source boards using the RP2350A-QFN60
Real designs built with the RP2350A-QFN60, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
RP2040/RP2350
Arctyx-Nano
Keyaan-07
51 × 21 mm63 parts4LMIT124RP2040/RP2350
PicoKey
Keyaan-07
34.5 × 18.5 mm36 parts2LMIT9RP2040/RP2350
RP2350-Eins
red-scorp
68.6 × 53.3 mm70 parts4LNo license5RP2040/RP2350
IPico V5
MiniProjectDIY
15 × 31 mm38 parts2LCC0-1.05RP2040/RP2350
RP2350-ProMini
red-scorp
17.8 × 41.9 mm46 parts4LNo license4RP2040/RP2350
VikramSat-RF-subsystem
Astralis1409
72 × 72 mm89 parts4LMIT2RP2040/RP2350
Devboardrp2350
espcaa
59.2 × 26.4 mm43 parts4LNo license2RP2040/RP2350
Rp2350-boards
abzman
21 × 66.9 mm62 parts2LUnlicense1RP2040/RP2350
Wuard core v1
wuard
17.8 × 19.9 mm28 parts2LCERN-OHL-S-2.01RP2040/RP2350
VikramSat-RF-subsystem
Keyaan-07
72 × 72 mm89 parts4LMIT0RP2040/RP2350
MI-23-Calculator-Hardware
MiracleAig
87.1 × 49.4 mm40 parts2LMIT0RP2040/RP2350
USB-Security key.
MohamadAminGhanoum
19.5 × 50.1 mm39 parts2LNo license0RP2040/RP2350
IPicoV5 Panelized
MiniProjectDIY
75 × 70 mm38 parts2LCC0-1.05RP2040/RP2350
Devbackup
espcaa
33.6 × 25.4 mm41 parts2LNo license2RP2040/RP2350
RP2350
sai-ydev
59 × 25.5 mm59 parts4LMIT1
How designs wire the RP2350A-QFN60
Read from the KiCad layouts of 13 open source designs, one per repository: what each pin of the RP2350A-QFN60 connects to, and the resistors, capacitors and other passives placed on it.
- The ADC_AVDD pin has a decoupling capacitor on 12 of 13 designs, most often 100 nF (then 4.7 µF).
- The VREG_AVDD pin has a capacitor to GND on 12 of 13 designs, most often 4.7 µF (then 2.2 µF).
- The VREG_LX pin has a inductor on 12 of 13 designs, most often 3.3 µH.
- The IOVDD pins have a decoupling capacitor on 11 of 13 designs, most often 100 nF (then 4.7 µF).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| IOVDDpin 1, 11, 20, 30, 38, 45 | Connected to: 3.3V 100% |
|
| GPIO3pin 5 | Connected to: Not connected 62% · a signal 38% | — |
| DVDDpin 6, 23, 39 | Connected to: 1.1V 100% |
|
| GPIO10pin 14 | Connected to: Not connected 69% · a signal 31% | — |
| GPIO14pin 18 | Connected to: Not connected 69% · a signal 31% | — |
| XINpin 21 | Connected to: Signal 100% |
|
| XOUTpin 22 | Connected to: Signal 100% |
|
| RUNpin 26 | Connected to: A connector 23% · 3.3V 31% |
|
| GPIO25pin 37 | Connected to: A connector 23% · not connected 31% |
|
| GPIO26_ADC0pin 40 | Connected to: Not connected 62% · a signal 38% | — |
| GPIO27_ADC1pin 41 | Connected to: Not connected 62% · a signal 38% | — |
| ADC_AVDDpin 44 | Connected to: 3.3V 92% |
|
| VREG_AVDDpin 46 | Connected to: Signal 62% · VREG_AVDD 38% |
|
| VREG_PGNDpin 47 | Connected to: GND 92% | — |
| VREG_LXpin 48 | Connected to: Signal 77% · VREG_LX 23% |
|
| VREG_VINpin 49 | Connected to: 3.3V 100% |
|
| VREG_FBpin 50 | Connected to: 1.1V 100% |
|
| USB_DMpin 51 | Connected to: Signal 100% |
|
| USB_DPpin 52 | Connected to: Signal 100% |
|
| USB_OTP_VDDpin 53 | Connected to: 3.3V 100% |
|
| QSPI_IOVDDpin 54 | Connected to: 3.3V 100% |
|
| QSPI_SSpin 60 | Connected to: W25Q128JVS 38% · not connected 15% |
|
| GNDpin 61 | Connected to: GND 100% | — |
31 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Arctyx-Nano by Keyaan-07, PicoKey by Keyaan-07, IPico V5 by MiniProjectDIY and RP2350-Eins by red-scorp.
The RP2350A-QFN60 in open source designs
The gallery holds 15 open source boards using the RP2350A-QFN60 from 13 GitHub repositories; a typical one measures about 51 × 41.9 mm and carries around 43 components.
53% are two-layer designs, the rest use four layers or more, and 67% carry an open source license.
The most starred is Arctyx-Nano by Keyaan-07.
Parts used alongside the RP2350A-QFN60
Microcontrollers on boards using the RP2350A-QFN60
What boards using the RP2350A-QFN60 are built for
RP2350A-QFN60: common questions
Where can I find a RP2350A-QFN60 reference design?
Each of the 15 boards on this page is a real design using the RP2350A-QFN60. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the RP2350A-QFN60 ADC_AVDD pin?
The ADC_AVDD pin has a decoupling capacitor on 12 of 13 designs, most often 100 nF (then 4.7 µF). Counted from the KiCad layouts of 13 open source designs using the RP2350A-QFN60.
How is the RP2350A-QFN60 VREG_AVDD pin connected?
The VREG_AVDD pin has a capacitor to GND on 12 of 13 designs, most often 4.7 µF (then 2.2 µF). Counted from the KiCad layouts of 13 open source designs using the RP2350A-QFN60.
How is the RP2350A-QFN60 VREG_LX pin connected?
The VREG_LX pin has a inductor on 12 of 13 designs, most often 3.3 µH. Counted from the KiCad layouts of 13 open source designs using the RP2350A-QFN60.
What parts are used alongside the RP2350A-QFN60?
The W25Q128JVS, AMS1117S-3.3, 4259-63, AMS1117-3.3 and BALF-SPI2-02D3 appear in the most repositories here.
Which microcontrollers do boards using the RP2350A-QFN60 use?
Most are built on RP2040/RP2350 (15).
How big is a typical board using the RP2350A-QFN60?
The median is 51 × 41.9 mm, and 53% are two-layer designs.
What is the most popular open source board using the RP2350A-QFN60?
By GitHub stars, Arctyx-Nano by Keyaan-07, with 124 stars.
Can I simulate one of these boards using the RP2350A-QFN60 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.