Sk003a outbasic
About the Sk003a outbasic PCB
Sk003a outbasic is an open source PCB design by mirdej, published on GitHub. It is a 2-layer board measuring 25.4 × 42 mm, with 30 components from 25 distinct parts.
Other key parts include the LM393, TLV3201 and NE5532. By type, the board carries 13 resistors, 7 capacitors, 4 diodes, 3 ICs, 1 transistor and 1 connector.
From the project
The Synkie is a modular open source analog video processor, developed by Michael Egger, Max Egger and Flo Kaufmann
The Synkie is a modular open source analog video processor, developed by Michael Egger, Max Egger and Flo Kaufmann. A bit like the venerable modular Moog synthesizer it lets you toy around with the signal using patch cables – but this time not producing sound but images. It is an instrument for video, a playground, a platform to explore new ways to transform a video signal. Synkie is still in development, we constantly develop new modules – and even the base specifications may still change over time.
Main components on the Sk003a outbasic
Sk003a outbasic bill of materials (BOM)
30 components, 25 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | LM393 LMH6643 | VSSOP-8_3x3mm_P0.65mm | U1 |
| 1 | TLV3201 LMH6643 | VSSOP-8_3x3mm_P0.65mm | U2 |
| 1 | NE5532 DG419LEDY | SOIC-8_3.9x4.9mm_P1.27mm | U3 |
| 1 | BC857BS | SOT-363_SC-70-6_Handsoldering | Q1 |
| 1 | Conn_01x14 | SYNKIE-BUS.v3 | J1 |
| 1 | TestPoint | TestPoint_THTPad_D4.0mm_Drill2.0mm | TP1 |
| 2 | BAT54S | SOT-23 | D1, D2 |
| 1 | 1N5819WS BAT54S | SOT-23 | D3 |
| 1 | BAT54S SM4007PL | D_SOD-123F | D4 |
| 1 | 100n | C_0603_1608Metric | C1 |
| 1 | 10U 100n | C_0603_1608Metric | C2 |
| 4 | 100N 100n | C_0603_1608Metric | C3, C4, C5, C7 |
| 1 | 100N 1n | C_0603_1608Metric | C6 |
| 1 | 47K 12k | R_0603_1608Metric | R1 |
| 1 | 12K 75 | R_0603_1608Metric | R2 |
| 1 | 3K3 75 | R_0603_1608Metric | R3 |
| 1 | 2K2 75 | R_0603_1608Metric | R4 |
| 2 | 75 | R_0603_1608Metric | R5, R13 |
| 1 | 4K7 75 | R_0603_1608Metric | R6 |
| 1 | 47K 75 | R_0603_1608Metric | R7 |
Show 5 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 47K 120 | R_0603_1608Metric | R8 |
| 1 | 5k6 | R_0603_1608Metric | R9 |
| 1 | 47K 330 | R_0603_1608Metric | R10 |
| 1 | 27k | R_0603_1608Metric | R11 |
| 1 | 12k | R_0603_1608Metric | R12 |
Sk003a outbasic design files
The KiCad project lives in the mirdej/synkie repository on GitHub; these links point at the commit this page was built from.
Sk003a outbasic: common questions
How big is the Sk003a outbasic PCB?
The Sk003a outbasic measures 25.4 × 42 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Sk003a outbasic?
30 components, from 25 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Sk003a outbasic design files?
From the mirdej/synkie repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Sk003a outbasic design in my own project?
The repository has no license, so all rights stay with mirdej. Use it as a reference, and ask the author before reusing the design.
More boards in synkie
Sk162-herd mixer
104.3 × 106.8 mm223 parts4LNo license47
Building blocks
99 × 70.7 mm162 parts2LNo license47
ESP32Sk612-delay
100 × 95 mm159 parts4LNo license47
Sk801-rgb
98.5 × 34.6 mm135 parts2LNo license47
AVR/ArduinoSk730-cv sequencer
101 × 107 mm130 parts2LNo license47
Sk101-inAndOut
41.9 × 98.4 mm110 parts4LNo license47
Sk123-counter
20 × 128.5 mm87 parts2LNo license47
Sk001-master input
41.9 × 82.6 mm74 parts4LNo license47
Sk800-rgb
43.3 × 109.5 mm66 parts2LNo license47
Sk005-monitor resyncer
49 × 43 mm62 parts4LNo license47
Sk010-backplane
196.1 × 29.7 mm56 parts2LNo license47