15 open source boards using the TLV3201
Real designs built with the TLV3201, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
Sk162-herd mixer
mirdej
104.3 × 106.8 mm223 parts4LNo license47PIC
Lightlink remote outlet
spstack
47 × 66 mm59 parts2LNo license0Building blocks
mirdej
99 × 70.7 mm162 parts2LNo license47AVR/Arduino
Pulser V2 HV Board
xy-kasumi
100 × 50 mm62 parts4LNo license0Entropy r3
sokrasins
21 × 28 mm32 parts2LNo license0ESP32
Sk612-delay
mirdej
100 × 95 mm159 parts4LNo license47Sk801-rgb
mirdej
98.5 × 34.6 mm135 parts2LNo license47AVR/Arduino
Sk730-cv sequencer
mirdej
101 × 107 mm130 parts2LNo license47Sk101-inAndOut
mirdej
41.9 × 98.4 mm110 parts4LNo license47Sk123-counter
mirdej
20 × 128.5 mm87 parts2LNo license47Sk001-master input
mirdej
41.9 × 82.6 mm74 parts4LNo license47Sk800-rgb
mirdej
43.3 × 109.5 mm66 parts2LNo license47Sk005-monitor resyncer
mirdej
49 × 43 mm62 parts4LNo license47Sk010-backplane
mirdej
196.1 × 29.7 mm56 parts2LNo license47Sk003a outbasic
mirdej
25.4 × 42 mm30 parts2LNo license47
The TLV3201 in open source designs
The gallery holds 15 open source boards using the TLV3201 from 4 GitHub repositories; a typical one measures about 49 × 70.7 mm and carries around 74 components.
60% are two-layer designs, the rest use four layers or more, and 0% carry an open source license.
The most starred is Sk162-herd mixer by mirdej.
Microcontrollers on boards using the TLV3201
What boards using the TLV3201 are built for
TLV3201: common questions
Where can I find a TLV3201 reference design?
Each of the 15 boards on this page is a real design using the TLV3201. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the TLV3201 use?
Most are built on AVR/Arduino (2), ESP32 (1) and PIC (1).
How big is a typical board using the TLV3201?
The median is 49 × 70.7 mm, and 60% are two-layer designs.
What is the most popular open source board using the TLV3201?
By GitHub stars, Sk162-herd mixer by mirdej, with 47 stars.
Can I simulate one of these boards using the TLV3201 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.