Llluvia
misaaaaaa·llluvia-pcb·llluvia-pcb/llluvia-pcb.kicad_pcb
About the Llluvia PCB
Llluvia is an open source PCB design by misaaaaaa, published on GitHub under the MIT license. It is a 2-layer board measuring 90 × 55 mm, with 26 components from 16 distinct parts.
Other key parts include the LM324. By type, the board carries 11 resistors, 4 connectors, 4 diodes, 2 capacitors, 1 IC and 1 transistor.
It belongs with the audio designs in this gallery.
From the project
circuito generador de gotas de lluvia lumínicas y sonoras
Circuito generador de gotas de lluvia lumínicas y sonoras
El circuito utiliza un transistor NPN de manera que genera un ruido rosa. Con la base conectada a negativo, el emisor a positivo y el colector desconectado, se genera una conducción inversa a través de la unión base-emisor. Esta configuración crea fluctuaciones aleatorias de corriente que producen variaciones similares al ruido rosa, lo que asemeja el sonido de una lluvia torrencial. Esta señal es llevada a un comparador simple, al que por medio de un potenciómetro se puede controlar cuantas "gotas" se dejan pasar.

Main components on the Llluvia
Llluvia bill of materials (BOM)
26 components, 16 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | LM324 | DIP-14_W7.62mm_LongPads | U1 |
| 1 | 2N2222A PN2222A | TO-92_Inline_Wide | Q2 |
| 2 | JACK_DC | BarrelJack_Horizontal | J2, J3 |
| 1 | ON/OFF | PinHeader_1x02_P2.54mm_Vertical | J4 |
| 1 | AUDIOJACK2_GROUND_SWITCH AudioJack2_Ground_Switch | Jack_3.5mm_CUI_SJ1-3525N_Horizontal | J5 |
| 1 | A27 BATTERY | Battery_23A | BT1 |
| 2 | 100K 100k | Potentiometer_Bourns_PTV09A-1_Single_Vertical | RV1, RV2 |
| 2 | LED | LED_PCBasDiffuser | D1, D3 |
| 1 | 1N4007 | D_DO-41_SOD81_P10.16mm_Horizontal | D2 |
| 1 | LED | LED_D5.0mm | D4 |
| 2 | 1u | C_Disc_D5.1mm_W3.2mm_P5.00mm | C1, C2 |
| 1 | 1M | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1 |
| 1 | 470K 470k | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R2 |
| 1 | 220 | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R3 |
| 5 | 1k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R4, R6, R7, R8, R11 |
| 3 | 100K 100k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R5, R9, R10 |
Llluvia design files
The KiCad project lives in the misaaaaaa/llluvia-pcb repository on GitHub; these links point at the commit this page was built from.
Llluvia: common questions
How big is the Llluvia PCB?
The Llluvia measures 90 × 55 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Llluvia?
26 components, from 16 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Llluvia design files?
From the misaaaaaa/llluvia-pcb repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Llluvia design in my own project?
Yes, under the terms of its MIT license, which misaaaaaa chose for the repository.
Similar boards
KLOR
GEIGEIGEIST
160.2 × 118.3 mm79 parts2LGPL-3.01.2kButtonsLEDs
shanteacontrols
390 × 37 mm82 parts2LApache-2.0956USB
shanteacontrols
52 × 12.6 mm6 parts2LApache-2.0956Pots
shanteacontrols
390 × 93 mm75 parts2LApache-2.0956PicoGUS Hand386
polpo
29.2 × 75.2 mm43 parts4LGPL-2.0800Snark barker
schlae
231.1 × 106.7 mm193 parts2LNo license687