Pev uvw sw
About the Pev uvw sw PCB
Pev uvw sw is an open source AVR/Arduino PCB design by mit-pev, published on GitHub. It is a 4-layer board measuring 139.7 × 76.2 mm, with 61 components from 41 distinct parts.
Its main chip is the ATmega328P-AU, from the AVR/Arduino family. Other key parts include the M453_LQFP48, TCAN1042V-Q1 and MC33063AD. By type, the board carries 17 capacitors, 17 resistors, 9 connectors, 4 ICs, 4 diodes and 3 relays.
Main components on the Pev uvw sw
Pev uvw sw bill of materials (BOM)
61 components, 41 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | M453_LQFP48 | LQFP-48_7x7mm_P0.5mm | U2 |
| 1 | TCAN1042V-Q1 | SOIC-8_3.9x4.9mm_P1.27mm | U3 |
| 1 | ATmega328P-AU | TQFP-32_7x7mm_P0.8mm | U4 |
| 1 | MC33063AD | SOIC-8_3.9x4.9mm_P1.27mm | U5 |
| 1 | MMBT2222A | SOT-23 | Q1 |
| 1 | NZT560A | SOT-223-3_TabPin2 | Q2 |
| 1 | CSTNE16M0V530000R0 | Resonator_SMD_muRata_CSTxExxV-3Pin_3.0x1.1mm_HandSoldering | Y1 |
| 1 | X12M | Crystal_HC49-U_Vertical | Y2 |
| 1 | 1050170001 | USB_Micro-B_Molex-105017-0001 | J1 |
| 1 | CAN bus | JST_XH_B4B-XH-A_1x04_P2.50mm_Vertical | J2 |
| 1 | CTRL | motor_uvw_only_conn | J3 |
| 1 | CTRL | JST_PH_B6B-PH-K_1x06_P2.00mm_Vertical | J4 |
| 1 | MOTOR | motor_uvw_only_conn | J5 |
| 1 | MOTOR | JST_PH_B6B-PH-K_1x06_P2.00mm_Vertical | J6 |
| 1 | VESC | motor_uvw_only_conn | J7 |
| 1 | VESC | JST_PH_B6B-PH-K_1x06_P2.00mm_Vertical | J8 |
| 1 | 5V_EXT | JST_XH_B02B-XH-A_1x02_P2.50mm_Vertical | J9 |
| 3 | 1432870-1 | TE_Relay_VCF4-1000_PCB_Socket | K1, K2, K3 |
| 1 | AVRRST | SW_PUSH_6mm_H4.3mm | SW1 |
| 1 | CLV1L-FKB | LED_Avago_PLCC4_3.2x2.8mm_CW | D3 |
Show 21 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | LED | LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D4 |
| 1 | MBR130LSFT1G | D_SOD-123F | D5 |
| 1 | SS14 | D_SMA | D6 |
| 1 | Ferrite_Bead | L_0805_2012Metric_Pad1.15x1.40mm_HandSolder | FB1 |
| 1 | SRN6045TA-220M | L_Bourns_SRN6045TA | L2 |
| 7 | 100nF | C_0603_1608Metric_Pad1.05x0.95mm_HandSolder | C6, C9, C10, C11, C12, C13, C14 |
| 4 | 1uF | C_0603_1608Metric_Pad1.05x0.95mm_HandSolder | C7, C8, C18, C21 |
| 2 | 18pF | C_0603_1608Metric_Pad1.05x0.95mm_HandSolder | C15, C16 |
| 1 | 100uF | CP_EIA-6032-28_Kemet-C | C17 |
| 1 | 330pF | C_0603_1608Metric_Pad1.05x0.95mm_HandSolder | C19 |
| 2 | 47uF | CP_EIA-7343-43_Kemet-X | C20, C22 |
| 2 | 33R | R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R4, R5 |
| 2 | 10K | R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R6, R11 |
| 5 | 1K | R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R7, R12, R13, R14, R15 |
| 1 | 300R | R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R8 |
| 2 | 240R | R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R9, R10 |
| 1 | 0R12 | R_1206_3216Metric_Pad1.42x1.75mm_HandSolder | R16 |
| 1 | 180R | R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R17 |
| 1 | 20K | R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R18 |
| 1 | 1K1 | R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R19 |
| 1 | 3K6 | R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R20 |
Pev uvw sw design files
The KiCad project lives in the mit-pev/pev_hardware_pcb repository on GitHub; these links point at the commit this page was built from.
Pev uvw sw: common questions
What microcontroller does the Pev uvw sw use?
The Pev uvw sw is built around the ATmega328P-AU, from the AVR/Arduino family.
How big is the Pev uvw sw PCB?
The Pev uvw sw measures 139.7 × 76.2 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the Pev uvw sw?
61 components, from 41 distinct parts. The full bill of materials is listed on this page.
Where can I download the Pev uvw sw design files?
From the mit-pev/pev_hardware_pcb repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the Pev uvw sw design in my own project?
The repository has no license, so all rights stay with mit-pev. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Pev uvw sw without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.
More boards in pev_hardware_pcb
Similar boards
AVR/ArduinoMagspoof
samyk
35 × 29 mm11 parts2LNo license4.2k
AVR/ArduinoRedox keyboard
mattdibi
162.2 × 126.5 mm77 parts2LMIT2.0k
AVR/ArduinoLabrador
espotek-org
36.8 × 34.7 mm75 parts2LNo license1.2k
AVR/ArduinoV4
stuartpittaway
30 × 50 mm38 parts2LCC-BY-NC-4.01.1k
AVR/ArduinoModuleV450
30 × 61.4 mm39 parts2LCC-BY-NC-4.01.1k
AVR/ArduinoDiscipline
coseyfannitutti
304.9 × 122.8 mm170 parts2LCC-BY-NC-4.01.0k