6301-temp sensor
mitchgu·6301-temp-sensor·kicad/temp_sensor.kicad_pcb
About the 6301-temp sensor PCB
6301-temp sensor is an open source PCB design by mitchgu, published on GitHub. It is a 2-layer board measuring 97.8 × 58.4 mm, with 63 components from 17 distinct parts.
Other key parts include the MPQ3906, CD4066B, LM6132, LM311N and 74HC595-R. By type, the board carries 41 resistors, 8 ICs, 8 capacitors, 4 LEDs and 2 connectors.
It belongs with the sensors designs in this gallery.
Main components on the 6301-temp sensor
6301-temp sensor bill of materials (BOM)
63 components, 17 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | MPQ3906 | DIP-14_W7.62mm | U1 |
| 1 | CD4066B | DIP-14_W7.62mm | U2 |
| 1 | LM6132 | DIP-8_W7.62mm | U3 |
| 1 | LM311N | DIP-8_W7.62mm | U4 |
| 4 | 74HC595-R | DIP-16_W7.62mm | U6, U7, U8, U9 |
| 1 | Pmod | Pmod_Male | P1 |
| 1 | CONN_01X05 | Pin_Header_Straight_1x05 | P2 |
| 4 | 7SEG_PHYSICAL | 7SegmentLED_LTS6760_LTS6780 | AFF1, AFF2, AFF3, AFF4 |
| 1 | 1u | C_Rect_L13_W6_H12_P10 | C1 |
| 7 | 0.1u | C_0805_HandSoldering | C2, C3, C4, C5, C6, C7, C8 |
| 4 | 10K | Resistor_Horizontal_RM7mm | R1, R5, R6, R41 |
| 1 | 100K | Resistor_Horizontal_RM7mm | R2 |
| 1 | 2.2K | Resistor_Horizontal_RM7mm | R3 |
| 1 | 470 | Resistor_Horizontal_RM7mm | R4 |
| 32 | 100 | R_0805_HandSoldering | R7, R8, R9, R10, R11, R12, R13, R14 +24 |
| 1 | 3.9K | Resistor_Horizontal_RM7mm | R15 |
| 1 | 4.7K | Resistor_Horizontal_RM7mm | R16 |
6301-temp sensor design files
The KiCad project lives in the mitchgu/6301-temp-sensor repository on GitHub; these links point at the commit this page was built from.
6301-temp sensor: common questions
How big is the 6301-temp sensor PCB?
The 6301-temp sensor measures 97.8 × 58.4 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the 6301-temp sensor?
63 components, from 17 distinct parts. The full bill of materials is listed on this page.
Where can I download the 6301-temp sensor design files?
From the mitchgu/6301-temp-sensor repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the 6301-temp sensor design in my own project?
The repository has no license, so all rights stay with mitchgu. Use it as a reference, and ask the author before reusing the design.
Similar boards
Sensor smd
scottbez1
40 × 20 mm5 parts2LApache-2.04.2kSensors
StuckAtPrototype
15.2 × 9 mm14 parts4LApache-2.03.8kMicrophone
Mentra-Community
5.5 × 6.1 mm6 parts2LMIT1.2kTemperaturePCB PANEL
stuartpittaway
116 × 75.5 mm178 parts2LCC-BY-NC-4.01.1kPots
shanteacontrols
390 × 93 mm75 parts2LApache-2.0956USB
shanteacontrols
52 × 12.6 mm6 parts2LApache-2.0956