Top board panel
About the Top board panel
Top board panel is an open source NXP PCB design by mod-audio, published on GitHub. It is a 2-layer board measuring 170 × 135.7 mm, with 125 components from 32 distinct parts.
Its main chip is the LPC1759FBD80, from the NXP family. Other key parts include the NCP1117DT50G, NCP1117DT33G, MCP6001 and PCA9685. By type, the board carries 47 resistors, 42 capacitors, 9 diodes, 7 connectors, 5 ICs and 3 transistors.
From the project
Hardware project of MOD Duo
This repository contains the schematics and PCB design files for the MOD Duo hardware (http://moddevices.com/).
These files were created and can be improved with KiCAD, a free software Electronics CAD which is available at http://www.kicad.org/
This project should work with last revision of KiCad libraries and footprints available at https://github.com/KiCad/
Main components on the Top board panel
Top board panel bill of materials (BOM)
125 components, 32 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | NCP1117DT50G | DPAK-2 | U1 |
| 1 | NCP1117DT33G | DPAK-2 | U2 |
| 1 | MCP6001 | SOT-23-5 | U3 |
| 1 | LPC1759FBD80 | LQFP-80_12x12mm_Pitch0.5mm | U4 |
| 1 | PCA9685 | TSSOP-28_4.4x9.7mm_Pitch0.65mm | U5 |
| 1 | 2N7002 | SOT-23 | Q1 |
| 2 | MMBT2222A | SOT-23 | Q2, Q3 |
| 1 | 10MHz | Crystal_HC49-SD_SMD | Y1 |
| 1 | POWER_CONN | S2B-XH-A | P1 |
| 1 | ISP | Pin_Header_Straight_2x05_Pitch1.27mm | P2 |
| 1 | BOTTOM_CONN | Pin_Header_Angled_2x10 | P4 |
| 2 | BACKLIGHT | SMD_Pin_Header_Angled_2x01_Pitch2.00mm | P5, P6 |
| 2 | FOOTSWITCH | Pin_Header_Angled_1x02 | P7, P8 |
| 2 | PEC11R | PEC11R-4xxxF-Sxxxx | E1, E2 |
| 2 | ERC12864-2 | ER-CON30HB-1 | GLCD1, GLCD2 |
| 5 | HOLE | Hole_3.5mm | H1, H2, H3, H4, H5 |
| 1 | R_PACK4 | R_Array_Concave_4x0402 | RP1 |
| 1 | BT_RESET | SW_SPST_FSMSM | SW1 |
| 3 | 1N4148 | SOD-323 | D1, D2, D3 |
| 6 | LED_RGB | LED_RGB_PLLC-6 | D4, D5, D6, D7, D8, D9 |
Show 12 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 14 | 100nF | C_0603 | C1, C2, C3, C6, C9, C10, C11, C12 +6 |
| 1 | 100uF | c_elec_6.3x5.3 | C4 |
| 3 | 10uF | C_0805 | C5, C19, C20 |
| 2 | 39pF | C_0603 | C7, C8 |
| 18 | 1uF | C_0805 | C21, C22, C23, C24, C25, C26, C27, C28 +10 |
| 4 | 0.01uF | C_0603 | C39, C40, C41, C42 |
| 1 | 160K | R_0603 | R1 |
| 21 | 10K | R_0603 | R2, R3, R5, R7, R8, R10, R11, R12 +13 |
| 3 | 100K | R_0603 | R4, R6, R9 |
| 2 | 3K3 | R_0603 | R13, R14 |
| 18 | 220R | R_0603 | R27, R28, R29, R30, R31, R32, R33, R34 +10 |
| 2 | 120R | R_2512 | R45, R46 |
Top board panel design files
The KiCad project lives in the mod-audio/mod-hw-duo repository on GitHub; these links point at the commit this page was built from.
Top board panel: common questions
What microcontroller does the Top board panel use?
The Top board panel is built around the LPC1759FBD80, from the NXP family.
How big is the Top board panel?
The Top board panel measures 170 × 135.7 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Top board panel?
125 components, from 32 distinct parts. The full bill of materials is listed on this page.
Where can I download the Top board panel design files?
From the mod-audio/mod-hw-duo repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the Top board panel design in my own project?
The repository has no license, so all rights stay with mod-audio. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Top board panel without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug NXP firmware against it before you order a PCB.
More boards in mod-hw-duo
Similar boards
NXP32Bit shift register
MaltWhiskey
100 × 54 mm56 parts4LNo license763
NXPMega-Cube-Board
200 × 54 mm100 parts4LNo license763
NXPMCL64
MicroCoreLabs
39.3 × 61.8 mm9 parts4LNo license532
NXPROM Emulator
21.5 × 37.1 mm5 parts2LNo license532
NXPMCLZ8
37.1 × 61.5 mm6 parts4LNo license532
NXPXTMAX
81 × 46 mm14 parts4LNo license532