HardLabs

Smart home

MohamadAminGhanoum·Smart-home·Kicad-PCB/ESP-HOME.kicad_pcb

Smart home PCB layout, top view — open source ESP32 board by MohamadAminGhanoum

About the Smart home PCB

Smart home is an open source ESP32 PCB design by MohamadAminGhanoum, published on GitHub. It is a 2-layer board measuring 108.4 × 73.8 mm, with 3 components from 3 distinct parts.

Its main chip is the ESP32-DEVKIT-V1, from the ESP32 family. By type, the board carries 1 IC and 1 module.

It belongs with the iot & wireless, robotics & motion and sensors designs in this gallery.

From the project

My personal smart home project

BOM - Smart home - BOM.csv ESP32 - Smart home project: -------------------------------- Project description: This project is a custom-built ESP32-based control to automate a curtain motor and manage multiple devices in my room such as a fan, LED strip, temperature sensor, and additional motors. This is buit using a custom PCB designed in KiCad, using only salvaged components from old electronics but also used Arduino uno for the code

Smart home, from the project README
From the project README

Main components on the Smart home

ESP32-DEVKIT-V1

Smart home bill of materials (BOM)

3 components, 3 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
ESP32-DEVKIT-V1
U1
1
Fan_3pin
M2
1
Thermistor
TH1

Smart home design files

The KiCad project lives in the MohamadAminGhanoum/Smart-home repository on GitHub; these links point at the commit this page was built from.

Smart home: common questions

What microcontroller does the Smart home use?

The Smart home is built around the ESP32-DEVKIT-V1, from the ESP32 family.

How big is the Smart home PCB?

The Smart home measures 108.4 × 73.8 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Smart home?

3 components, from 3 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Smart home design files?

From the MohamadAminGhanoum/Smart-home repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Smart home design in my own project?

The repository has no license, so all rights stay with MohamadAminGhanoum. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Smart home without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

Similar boards