HardLabs

STM32-Current-Signature-Platform

mohamed-sebbar·STM32-Current-Signature-Platform·Hardware/Kicad/STM32_Current_Signature_Platform.kicad_pcb

STM32-Current-Signature-Platform PCB layout, top view — open source STM32 board by mohamed-sebbar

About the STM32-Current-Signature-Platform PCB

STM32-Current-Signature-Platform is an open source STM32 PCB design by mohamed-sebbar, published on GitHub under the CERN-OHL-W-2.0 license. It is a 4-layer board measuring 54 × 35 mm, with 39 components from 21 distinct parts.

Its main chip is the STM32F411CEUX, from the STM32 family. Other key parts include the INA226, XC6206PXXXMR and USBLC6-2P6. By type, the board carries 17 capacitors, 9 resistors, 4 ICs, 3 diodes, 2 crystals and 2 switches.

From the project

Design and implementation of a custom four-layer STM32F411CEU6 hardware platform for non-invasive embedded current signature acquisition and anomaly detection, including schematic capture, PCB design, firmware development, validation, experimental evaluation, and statistical analysis.

This directory contains the complete hardware design of the STM32 Current Signature Platform.

Contains the complete KiCad project including:

- Schematic - PCB layout - Project files - 3D model

Contains production-ready Gerber, BOM, and CPL files optimized for JLCPCB fabrication and SMT assembly.

- Gerber archive - Bill of Materials (BOM) - Component placement file (CPL) - IPC netlist - Designator list

Main components on the STM32-Current-Signature-Platform

STM32F411CEUXINA226XC6206PXXXMRUSBLC6-2P6

STM32-Current-Signature-Platform bill of materials (BOM)

39 components, 21 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
STM32F411CEUX
STM32F411CEUx
U1
1
INA226
U2
1
XC6206PXXXMR
XC6206PxxxMR
U3
1
USBLC6-2P6
U4
1
Crystal
Y1
1
HSE_CRYSTAL_GND24
HSE_Crystal_GND24
Y2
1
USB_C_RECEPTACLE_USB2.0_16P
USB_C_Receptacle_USB2.0_16P
J1
2
SW_Push
SW1, SW2
1
SS14
D1
1
C2290
YELLOW
D2
1
C2286
RED
D3
1
600R
FB1
4
1UF
1uF
C1, C2, C16, C17
2
4.7UF
4.7uF
C3, C10
7
100NF
100nF
C4, C9, C11, C12, C13, C14, C15
4
12PF
12pF
C5, C6, C7, C8
2
5K1
5k1
R1, R2
1
0R5
R3
3
4K7
4k7
R4, R5, R6
2
1k
R7, R8
Show 1 more
QtyPartRefs
1
10K
10k
R9

STM32-Current-Signature-Platform design files

The KiCad project lives in the mohamed-sebbar/STM32-Current-Signature-Platform repository on GitHub; these links point at the commit this page was built from.

STM32-Current-Signature-Platform: common questions

What microcontroller does the STM32-Current-Signature-Platform use?

The STM32-Current-Signature-Platform is built around the STM32F411CEUX, from the STM32 family.

How big is the STM32-Current-Signature-Platform PCB?

The STM32-Current-Signature-Platform measures 54 × 35 mm, has 4 copper layers and is 1.600198 mm thick.

How many components are on the STM32-Current-Signature-Platform?

39 components, from 21 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the STM32-Current-Signature-Platform design files?

From the mohamed-sebbar/STM32-Current-Signature-Platform repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the STM32-Current-Signature-Platform design in my own project?

Yes, under the terms of its CERN-OHL-W-2.0 license, which mohamed-sebbar chose for the repository.

Can I test firmware for the STM32-Current-Signature-Platform without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.

Similar boards