Icc gateway prerouting r2
About the Icc gateway prerouting r2 PCB
Icc gateway prerouting r2 is an open source NXP PCB design by moistpope, published on GitHub. It is a 4-layer board measuring 110 × 100 mm, with 66 components from 61 distinct parts.
Its main chip is the DEV-20360, from the NXP family. Other key parts include the LMR36510ADDAR, TJA1043T/1J, TJA1051T/3/2Z, ULN2003ADR and MCP2518FDT-E/SL. By type, the board carries 22 capacitors, 15 resistors, 12 diodes, 8 ICs, 4 relays and 2 connectors.
From the project
KiCad 10 project. Sits between the car harness and the ICC (head unit) main connector J1 (Molex stAK50h 160013-0641), passes every circuit straight through except the two CAN buses, which go through a Teensy 4.1 gateway with a normally-closed relay bypass.
KiCad 10 project. Sits between the car harness and the ICC (head unit) main connector J1 (Molex stAK50h 160013-0641), passes every circuit straight through except the two CAN buses, which go through a Teensy 4.1 gateway with a normally-closed relay bypass.
Schematic edits were made through the Konnect MCP tools (tools/konnectmcp.py is a stdio client for it). tools/design.py holds the full component and net table, tools/footprintstak50h.py generates the header footprint, tools/placeplan.py` the board placement.
Main components on the Icc gateway prerouting r2
Icc gateway prerouting r2 bill of materials (BOM)
66 components, 61 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | LMR36510ADDAR Texas Instruments | Texas_HTSOP-8-1EP_3.9x4.9mm_P1.27mm_EP2.95x4.9mm_Mask2.4x3.1mm_ThermalVias | U1 |
| 1 | TJA1043T/1J TJA1043T/1 (car IBUS1) NXP | SOIC-14_3.9x8.7mm_P1.27mm | U2 |
| 1 | TJA1043T/1J TJA1043T/1 (car IBUS2) NXP | SOIC-14_3.9x8.7mm_P1.27mm | U3 |
| 1 | TJA1051T/3/2Z TJA1051T/3 (ICC IBUS1) NXP | SOIC-8_3.9x4.9mm_P1.27mm | U4 |
| 1 | TJA1051T/3/2Z TJA1051T/3 (ICC IBUS2) NXP | SOIC-8_3.9x4.9mm_P1.27mm | U5 |
| 1 | ULN2003ADR ULN2003A Texas Instruments | SOIC-16_3.9x9.9mm_P1.27mm | U6 |
| 1 | DEV-20360 Teensy 4.1 SparkFun / PJRC | Teensy41 | U7 |
| 1 | MCP2518FDT-E/SL MCP2518FD-E/SL Microchip | SOIC-14_3.9x8.7mm_P1.27mm | U8 |
| 1 | ABM8-20.000MHZ-10-1-U-T 20MHz 3225 Abracon | Crystal_SMD_3225-4Pin_3.2x2.5mm | Y1 |
| 1 | 160013-0641 Molex | Molex_stAK50h_160013-0641 | J1 |
| 1 | 160014-0014 ICC pigtail solder pads Molex | ICC_wire_pads_2x29 | J2 |
| 1 | 1812L050/60MR 0.5A 60V Littelfuse | Fuse_1812_4532Metric | F1 |
| 1 | G6S-2 DC5 (bridge IBUS1) | Relay_DPDT_Omron_G6S-2 | K1 |
| 1 | G6S-2 DC5 (bridge IBUS2) | Relay_DPDT_Omron_G6S-2 | K2 |
| 1 | G6S-2 DC5 (terminators IBUS1) | Relay_DPDT_Omron_G6S-2 | K3 |
| 1 | G6S-2 DC5 (terminators IBUS2) | Relay_DPDT_Omron_G6S-2 | K4 |
| 1 | SS36-E3/57T SS36 Vishay | D_SMA | D1 |
| 1 | SMBJ33A Bourns | D_SMB | D2 |
| 1 | 1N5819HW-7-F BAT54 (INH1->EN) Diodes Inc | D_SOD-123 | D3 |
| 1 | 1N5819HW-7-F BAT54 (INH2->EN) Diodes Inc | D_SOD-123 | D4 |
Show 41 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 1N5819HW-7-F BAT54 (KL15->EN) Diodes Inc | D_SOD-123 | D5 |
| 1 | NUP2105LT1G NUP2105L (car IBUS1 ESD) onsemi | SOT-23-3 | D10 |
| 1 | NUP2105LT1G NUP2105L (car IBUS2 ESD) onsemi | SOT-23-3 | D11 |
| 1 | NUP2105LT1G NUP2105L (ICC IBUS1 ESD) onsemi | SOT-23-3 | D12 |
| 1 | NUP2105LT1G NUP2105L (ICC IBUS2 ESD) onsemi | SOT-23-3 | D13 |
| 1 | 150080GS75000 LED green (ACTIVE) Wurth | LED_0805_2012Metric | D20 |
| 1 | 150080YS75000 LED yellow (CAR bus) Wurth | LED_0805_2012Metric | D21 |
| 1 | 150080BS75000 LED blue (ICC bus) Wurth | LED_0805_2012Metric | D22 |
| 1 | SRN6045-150M 15uH 2A Bourns | L_Bourns_SRN6045TA | L1 |
| 2 | C3225X7R2A225K230AB 2.2uF 100V TDK | C_1210_3225Metric | C1, C2 |
| 1 | GRM21BR72A104KAC4L 100nF 100V Murata | C_0805_2012Metric | C3 |
| 1 | CC0603KRX7R9BB104 100nF 16V (BOOT) Yageo | C_0603_1608Metric | C4 |
| 1 | GRM188R61C105KA12J 1uF 16V (VCC) Murata | C_0603_1608Metric | C5 |
| 2 | CL21A226MOQNNNE 22uF 10V Samsung | C_0805_2012Metric | C6, C7 |
| 1 | CC0805KRX7R9BB104 100nF (U2 VCC) Yageo | C_0805_2012Metric | C10 |
| 1 | CC0805KRX7R9BB104 100nF (U2 VIO) Yageo | C_0805_2012Metric | C11 |
| 1 | CC0805KRX7R9BB104 100nF (U2 VBAT) Yageo | C_0805_2012Metric | C12 |
| 1 | CC0805KRX7R9BB104 100nF (U3 VCC) Yageo | C_0805_2012Metric | C13 |
| 1 | CC0805KRX7R9BB104 100nF (U3 VIO) Yageo | C_0805_2012Metric | C14 |
| 1 | CC0805KRX7R9BB104 100nF (U3 VBAT) Yageo | C_0805_2012Metric | C15 |
| 1 | CC0805KRX7R9BB104 100nF (U4 VCC) Yageo | C_0805_2012Metric | C16 |
| 1 | CC0805KRX7R9BB104 100nF (U4 VIO) Yageo | C_0805_2012Metric | C17 |
| 1 | CC0805KRX7R9BB104 100nF (U5 VCC) Yageo | C_0805_2012Metric | C18 |
| 1 | CC0805KRX7R9BB104 100nF (U5 VIO) Yageo | C_0805_2012Metric | C19 |
| 2 | GRM1885C1H150JA01D 15pF Murata | C_0603_1608Metric | C20, C21 |
| 1 | CC0603KRX7R9BB104 100nF (U8 VDD) Yageo | C_0603_1608Metric | C22 |
| 1 | CC0805KRX7R9BB104 10uF (U8 VDD) Yageo | C_0805_2012Metric | C23 |
| 1 | CC0603KRX7R9BB103 10nF (KL15 sense) Yageo | C_0603_1608Metric | C24 |
| 1 | RC0805FR-07100KL 100k (FB top) Yageo | R_0805_2012Metric | R1 |
| 1 | RC0805FR-0724K9L 24.9k (FB bottom) Yageo | R_0805_2012Metric | R2 |
| 1 | RC0805FR-07100KL 100k (EN pull-down) Yageo | R_0805_2012Metric | R3 |
| 1 | RC0805FR-0710KL 10k (KL15 -> EN) Yageo | R_0805_2012Metric | R4 |
| 1 | RC0805FR-0710KL 10k (KL15 -> U2 WAKE) Yageo | R_0805_2012Metric | R10 |
| 1 | RC0805FR-0710KL 10k (KL15 -> U3 WAKE) Yageo | R_0805_2012Metric | R11 |
| 1 | RC0805FR-07120RL 120R (car IBUS1 term) Yageo | R_0805_2012Metric | R20 |
| 1 | RC0805FR-07120RL 120R (ICC IBUS1 term) Yageo | R_0805_2012Metric | R21 |
| 1 | RC0805FR-07120RL 120R (car IBUS2 term) Yageo | R_0805_2012Metric | R22 |
| 1 | RC0805FR-07120RL 120R (ICC IBUS2 term) Yageo | R_0805_2012Metric | R23 |
| 1 | RC0805FR-07100KL 100k (KL15 sense) Yageo | R_0805_2012Metric | R30 |
| 1 | RC0805FR-0722KL 22k (KL15 sense) Yageo | R_0805_2012Metric | R31 |
| 3 | RC0805FR-071KL 1k Yageo | R_0805_2012Metric | R32, R33, R34 |
Icc gateway prerouting r2 design files
The KiCad project lives in the moistpope/fisker-icc-gateway repository on GitHub; these links point at the commit this page was built from.
Icc gateway prerouting r2: common questions
What microcontroller does the Icc gateway prerouting r2 use?
The Icc gateway prerouting r2 is built around the DEV-20360, from the NXP family.
How big is the Icc gateway prerouting r2 PCB?
The Icc gateway prerouting r2 measures 110 × 100 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the Icc gateway prerouting r2?
66 components, from 61 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Icc gateway prerouting r2 design files?
From the moistpope/fisker-icc-gateway repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.
Can I use the Icc gateway prerouting r2 design in my own project?
The repository has no license, so all rights stay with moistpope. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Icc gateway prerouting r2 without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug NXP firmware against it before you order a PCB.
More boards in fisker-icc-gateway
Similar boards
NXP32Bit shift register
MaltWhiskey
100 × 54 mm56 parts4LNo license763
NXPMega-Cube-Board
200 × 54 mm100 parts4LNo license763
NXPMCL6809
MicroCoreLabs
32.3 × 61 mm7 parts4LNo license532
NXPMCL68
31.6 × 84.1 mm13 parts4LNo license532
NXPMCL65+
72.6 × 64.1 mm6 parts2LNo license532
NXPMCLZ8
37.1 × 61.5 mm6 parts4LNo license532