24 open source boards using the ULN2003ADR
Real designs built with the ULN2003ADR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
AVR/Arduino
SplitFlapDriverATtiny1616V4.kicad
adamgmakes
30 × 60 mm25 parts2LNo license188Makerspace auth
google
65.5 × 57.8 mm38 partsApache-2.069FlippyDriver
NietoSkunk
189.4 × 59.1 mm310 parts4LMIT10ESP32
Micromouse
aiwachow
85 × 95 mm139 parts2LNo license5ESP32
PriusG2
ksmola
147.8 × 65 mm145 parts4LNo license3STM32
Rfc tackle sensor
Celnardur
47 × 59.7 mm66 parts4LMIT3RP2040/RP2350
UCNC Pi Board
staskaaa-netizen
200 × 150 mm314 parts2LNo license0STM32
XBT Autolauncher 3.0
cxs1529
310 × 100 mm216 parts2LNo license0STM32
Multi Mega Main V3
SungKeun-Kim
200 × 150 mm198 parts2LNo license0ESP32
Esp32s3-poc devboard
Galacs
74 × 66.8 mm87 parts4LNo license0AVR/Arduino
Sangaboard
kitspace-test-repos
65 × 56.5 mm85 parts2LCustom license0ESP32
Esp water monitor
kyleronan
137.5 × 86 mm81 parts2LMIT0NXP
Icc gateway
moistpope
110 × 100 mm66 parts4LNo license0STM32
Tackle sensor hardware
Collegiate-Robotic-Football-Conference
47 × 59.7 mm66 parts4LMIT0ESP32
Kcell faker
karlp
80 × 60 mm62 parts4LNo license050 google makerspace auth
ep-infosec
65.5 × 57.8 mm38 partsApache-2.00Buoy
wbarne12
30 × 60 mm30 parts2LNo license0AVR/Arduino
SplitFlapDriverATtiny1616V4.kicad
duonkha
30 × 60 mm25 parts2LNo license0ESP32
Paddlecard
juhapark21
88.5 × 49.1 mm5 parts2LNo license0NXP
Icc gateway prerouting r2
moistpope
110 × 100 mm66 parts4LNo license0Audioboard
grahamseamans
70 × 58 mm45 parts2LNo license0NXP
Icc gateway routed r2 before fixup
moistpope
110 × 100 mm66 parts4LNo license0- schematic only · 49 partsSTM32
ReefVolt DryContact — 4ch Form-C carrier
blueacro
49 parts4LCERN-OHL-P-2.00 Input switch
grahamseamans
57.3 × 17.6 mm10 parts2LNo license0
How designs wire the ULN2003ADR
Read from the KiCad layouts of 20 open source designs, one per repository: what each pin of the ULN2003ADR connects to, and the resistors, capacitors and other passives placed on it.
- The COM pin is tied to 12V on 14 of 20 designs (not connected on 2, a signal on 4).
- The O7 pin is left unconnected on 12 of 20 designs (a signal on 8).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| GNDpin 8 | Connected to: GND 100% | — |
| COMpin 9 | Connected to: 12V 70% · a signal 20% | — |
| O7pin 10 | Connected to: Not connected 60% · a signal 40% | — |
13 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include SplitFlapDriverATtiny1616V4.kicad pcb by adamgmakes, Makerspace auth by google, FlippyDriver by NietoSkunk and Micromouse-KICAD by aiwachow.
The ULN2003ADR in open source designs
The gallery holds 24 open source boards using the ULN2003ADR from 21 GitHub repositories; a typical one measures about 80 × 60 mm and carries around 66 components.
55% are two-layer designs, the rest use four layers or more, and 29% carry an open source license.
The most starred is SplitFlapDriverATtiny1616V4.kicad pcb by adamgmakes.
Parts used alongside the ULN2003ADR
Microcontrollers on boards using the ULN2003ADR
What boards using the ULN2003ADR are built for
ULN2003ADR: common questions
Where can I find a ULN2003ADR reference design?
Each of the 24 boards on this page is a real design using the ULN2003ADR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the ULN2003ADR COM pin connected?
The COM pin is tied to 12V on 14 of 20 designs (not connected on 2, a signal on 4). Counted from the KiCad layouts of 20 open source designs using the ULN2003ADR.
How is the ULN2003ADR O7 pin connected?
The O7 pin is left unconnected on 12 of 20 designs (a signal on 8). Counted from the KiCad layouts of 20 open source designs using the ULN2003ADR.
What parts are used alongside the ULN2003ADR?
The AMS1117-3.3, ATTINY1616-MNR, C20617301, C20617302 and ESP32-S3-MINI-1-N8 appear in the most repositories here.
Which microcontrollers do boards using the ULN2003ADR use?
Most are built on ESP32 (6), STM32 (5), AVR/Arduino (3) and NXP (3).
How big is a typical board using the ULN2003ADR?
The median is 80 × 60 mm, and 55% are two-layer designs.
What is the most popular open source board using the ULN2003ADR?
By GitHub stars, SplitFlapDriverATtiny1616V4.kicad pcb by adamgmakes, with 188 stars.
Can I simulate one of these boards using the ULN2003ADR before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.