12 open source boards using the MCP2518FDT-E/SL
Real designs built with the MCP2518FDT-E/SL, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
CAN-Transceiver-MCP2518-board hardware design
SolderedElectronics
38 × 22 mm20 parts2LTAPR-OHL-1.09ESP32
Cyd obd adapter
ssjrocks
100 × 60 mm166 parts4LAGPL-3.00ESP32
RT Open GPS Board
rtymk
85 × 100 mm111 parts4LMIT0NXP
Icc gateway
moistpope
110 × 100 mm66 parts4LNo license0RP2040/RP2350
Leos efm
VIP-LES
100 × 100 mm53 parts2LNo license0ESP32
Canfd mc hardware
Prinsessen
55 × 32 mm40 parts4LMIT0RP2040/RP2350
Leos-F26-radio
VIP-LES
100 × 100 mm22 parts2LNo license0RP2040/RP2350
Template stack
VIP-LES
100 × 100 mm13 parts2LNo license0RP2040/RP2350
Leos-F26-power
clee303
100 × 100 mm13 parts2LNo license0NXP
Icc gateway prerouting r2
moistpope
110 × 100 mm66 parts4LNo license0NXP
Icc gateway routed r2 before fixup
moistpope
110 × 100 mm66 parts4LNo license0Renesas
RA2E1-CAN-Rev2
SuzieLinux
92 × 70 mm25 parts2LGPL-3.00
How designs wire the MCP2518FDT-E/SL
Read from the KiCad layouts of 10 open source designs, one per repository: what each pin of the MCP2518FDT-E/SL connects to, and the resistors, capacitors and other passives placed on it.
- The OSC2_5 pin has a crystal on 10 of 10 designs, most often 40 MHz (then 20 MHz).
- The OSC2_5 pin has a capacitor to GND on 10 of 10 designs, most often 22 pF (then 10 pF).
- The OSC1_6 pin has a capacitor to GND on 10 of 10 designs, most often 22 pF (then 10 pF).
- The OSC1_6 pin has a crystal on 10 of 10 designs, most often 40 MHz (then 20 MHz).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| CLKO/SOF_3pin 3 | Connected to: Not connected 90% | — |
| OSC2_5pin 5 | Connected to: Signal 100% |
|
| OSC1_6pin 6 | Connected to: Signal 100% |
|
| VSS_7pin 7 | Connected to: GND 100% | — |
| INT1/GPIO1_8pin 8 | Connected to: Not connected 70% · a signal 30% | — |
| INT0/GPIO0_9pin 9 | Connected to: Not connected 70% · a signal 30% | — |
| VDD_14pin 14 | Connected to: 3.3V 100% |
|
7 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include CAN-Transceiver-MCP2518-board hardware design by SolderedElectronics, Leos-F26-power pcb by clee303, Icc gateway by moistpope and Canfd mc hardware by Prinsessen.
The MCP2518FDT-E/SL in open source designs
The gallery holds 12 open source boards using the MCP2518FDT-E/SL from 10 GitHub repositories; a typical one measures about 100 × 100 mm and carries around 47 components.
50% are two-layer designs, the rest use four layers or more, and 42% carry an open source license.
The most starred is CAN-Transceiver-MCP2518-board hardware design by SolderedElectronics.
Parts used alongside the MCP2518FDT-E/SL
Microcontrollers on boards using the MCP2518FDT-E/SL
What boards using the MCP2518FDT-E/SL are built for
MCP2518FDT-E/SL: common questions
Where can I find a MCP2518FDT-E/SL reference design?
Each of the 12 boards on this page is a real design using the MCP2518FDT-E/SL. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the MCP2518FDT-E/SL OSC2_5 pin connected?
The OSC2_5 pin has a crystal on 10 of 10 designs, most often 40 MHz (then 20 MHz). Counted from the KiCad layouts of 10 open source designs using the MCP2518FDT-E/SL.
How is the MCP2518FDT-E/SL OSC1_6 pin connected?
The OSC1_6 pin has a capacitor to GND on 10 of 10 designs, most often 22 pF (then 10 pF). Counted from the KiCad layouts of 10 open source designs using the MCP2518FDT-E/SL.
What decoupling capacitors do designs use on the MCP2518FDT-E/SL VDD_14 pin?
The VDD_14 pin has a decoupling capacitor on 10 of 10 designs, most often 100 nF (then 10 µF). Counted from the KiCad layouts of 10 open source designs using the MCP2518FDT-E/SL.
What parts are used alongside the MCP2518FDT-E/SL?
The MCP2562FDT-H/SN, PIM724 and LMR36510ADDAR appear in the most repositories here.
Which microcontrollers do boards using the MCP2518FDT-E/SL use?
Most are built on RP2040/RP2350 (4), ESP32 (3), NXP (3) and Renesas (1).
How big is a typical board using the MCP2518FDT-E/SL?
The median is 100 × 100 mm, and 50% are two-layer designs.
What is the most popular open source board using the MCP2518FDT-E/SL?
By GitHub stars, CAN-Transceiver-MCP2518-board hardware design by SolderedElectronics, with 9 stars.
Can I simulate one of these boards using the MCP2518FDT-E/SL before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.