HCPP NFC Hardware Badge
HCPP NFC Hardware Badge is an open source PCB design by monero-project: a 2-layer, 80 × 71 mm board with 5 components (4 distinct parts). It is built around the M24SR02-YMN. Filed under wearables.
The Sekura Monero Hardware Wallet
[](https://github.com/monero-project/kastelo/)
1. Safe, Vault, a place to store valuables 2. An open hardware Monero wallet
https://taiga.getmonero.org/project/michael-rfc-hwallet-1-implementation/
Built around
Parts list
5 components, 4 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | M24SR02-YMN | SOIC-8_3.9x4.9mm_Pitch1.27mm | U1, U2 |
| 1 | Antenna_Loop | NFCAntennatall | AE1 |
| 1 | SW_SPST | SW_SPST_K21102SP | SW1 |
| 1 | SW_SPST | SW_SPST_PTS645 | SW2 |
More boards in kastelo
Breakneck Hardware Wallet
145 × 165 mm105 parts2LCERN-OHL-1.2115
Breakneck Hardware Wallet
53.3 × 64 mm89 parts2LCERN-OHL-1.2115
AStable Timer LED Badge
100 × 95 mm78 parts2LCERN-OHL-1.2115
STM32Ledgblue
60.5 × 45.8 mm59 parts2LCERN-OHL-1.2115
AVR/ArduinoDefcoNFC Hardware Badge
70 × 100 mm31 parts2LCERN-OHL-1.2115
USB-C Receptacle Tester
66 × 21 mm3 parts2LCERN-OHL-1.2115
Similar boards
Microphone
Mentra-Community
5.5 × 6.1 mm6 parts2LMIT1.2k
OpenESC-20x20
OpenDrone-hw
31.2 × 33 mm180 parts6LCERN-OHL-S-2.0243
4in1
41.6 × 42.5 mm187 parts6LCERN-OHL-S-2.045
4in1-panel
41.6 × 80.4 mm249 parts6LCERN-OHL-S-2.045
EavesDrum Connector
tobigun
100 × 100 mm21 parts2LGPL-3.021
${PROJECT}
45.5 × 21 mm5 parts2LGPL-3.021