Breakneck
monero-project·kastelo·hardware/breakneck/breakneck.kicad_pcb
About the Breakneck PCB
Breakneck is an open source PCB design by monero-project, published on GitHub under the CERN-OHL-1.2 license. It is a 2-layer board measuring 53.3 × 64 mm, with 89 components from 51 distinct parts.
Other key parts include the ATECC508A, SST26VF064B, CEC1702, CP2102N and MIC5377YC5. By type, the board carries 29 capacitors, 28 resistors, 10 connectors, 7 ICs, 5 diodes and 4 switches.
From the project
The Sekura Monero Hardware Wallet
The Breakneck design includes rich features typical of a developer edition hardware wallet.
[](https://github.com/monero-project/kastelo/raw/master/hardware/breakneck/schematic/breakneck-sch.pdf)
[](https://raw.githubusercontent.com/monero-project/kastelo/master/hardware/breakneck/graphics/boardlaykicad.png) [](https://raw.githubusercontent.com/monero-project/kastelo/master/hardware/breakneck/graphics/boardlayoutrend.png) [](https://raw.githubusercontent.com/monero-project/kastelo/master/hardware/breakneck/graphics/boardrenderanim.gif)

Main components on the Breakneck
Breakneck bill of materials (BOM)
89 components, 51 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ATECC508A | DFN-8-1EP_2x3mm_Pitch0.5mm | U1 |
| 1 | SST26VF064B | DFN-S-8-1EP_6x5mm_Pitch1.27mm | U2 |
| 1 | CEC1702 | WFBGACEC1702 | U3 |
| 1 | CP2102N | QFN-28-1EP_5x5mm_Pitch0.5mm | U4 |
| 1 | MIC5377YC5 | SOT-353_SC-70-5 | U5 |
| 1 | LN6206P33M | SOT-23 | U6 |
| 1 | LN6206P15M | SOT-23 | U7 |
| 1 | Badgelife_shitty | Badgelife-Shitty-2x2 | X1 |
| 1 | Crystal | Crystal_SMD_3215-2Pin_3.2x1.5mm | Y1 |
| 1 | CONN_WEST | Pin_Header_Straight_1x20_Pitch2.54mm | J1 |
| 1 | CONN_DEDI | Pin_Header_Straight_2x04_Pitch2.54mm | J2 |
| 1 | CONN_OLED | Socket_Strip_Straight_1x07_Pitch2.54mm | J3 |
| 1 | USB_C_Rcpt_Min | USBC_Rcpt_Min_12401610E4-2A | J4 |
| 1 | CONN_SOUTH | Pin_Header_Straight_1x14_Pitch2.54mm | J5 |
| 1 | CONN_EAST | Pin_Header_Straight_1x20_Pitch2.54mm | J6 |
| 2 | GS2 | R_0805 | J10, J15 |
| 1 | CONN_JTAG_6P | PinSocket_2x05_P2.54mm_Vertical | J12 |
| 1 | CONN_JST | JST_PH_B2B-PH-K_02x2.00mm_Straight | J16 |
| 1 | Battery_Cell | Keystone_3000_1x12mm-CoinCell | BT1 |
| 1 | ER-CON30 | Eastrising_ER-CON30HT-1_01x30_P0.50mm | DS1 |
Show 31 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | Jumper | Pin_Header_Angled_1x02_Pitch2.54mm | JP1, JP2 |
| 2 | SW_SPST | SW_SPST_K21102SP | SW1, SW2 |
| 1 | SW_SPST | SW_SPST_ESE11MV1 | SW3 |
| 1 | SW_SPDT | SW_SPDT_CLSB-12A | SW4 |
| 1 | BAT54C | SOT-23 | D1 |
| 1 | SP0503BAHTG | SOT-143 | D2 |
| 1 | D_PMEG | D_SOD-123 | D5 |
| 2 | LED | LED_0805 | D6, D7 |
| 11 | 100nF | C_0805 | C1, C2, C8, C11, C15, C19, C21, C22 +3 |
| 2 | 470nF | C_0805 | C3, C14 |
| 11 | 1uF | C_0805 | C4, C5, C9, C10, C12, C18, C28, C29 +3 |
| 2 | 15pF | C_0805 | C6, C7 |
| 3 | 2.2uF | C_0805 | C13, C24, C27 |
| 2 | 0 | R_0805 | R1, R7 |
| 1 | 12K | R_0805 | R2 |
| 1 | 22K | R_0805 | R3 |
| 2 | 10K | R_0805 | R4, R29 |
| 2 | 3.9K | R_0805 | R5, R6 |
| 4 | 100K | R_0805 | R8, R9, R11, R26 |
| 1 | 10 | R_0805 | R10 |
| 1 | 390K | R_0805 | R12 |
| 1 | 100 | R_0805 | R13 |
| 1 | 1.5K | R_0805 | R15 |
| 2 | 2.4K | R_0805 | R16, R17 |
| 1 | 22.1K | R_0805 | R18 |
| 1 | 47.5K | R_0805 | R19 |
| 2 | 220 | R_0805 | R20, R21 |
| 2 | 1K | R_0805 | R22, R25 |
| 1 | 130K | R_0805 | R23 |
| 1 | 220K | R_0805 | R24 |
| 2 | 150 | R_0805 | R27, R28 |
Breakneck design files
The KiCad project lives in the monero-project/kastelo repository on GitHub; these links point at the commit this page was built from.
Breakneck: common questions
How big is the Breakneck PCB?
The Breakneck measures 53.3 × 64 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Breakneck?
89 components, from 51 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Breakneck design files?
From the monero-project/kastelo repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.
Can I use the Breakneck design in my own project?
Yes, under the terms of its CERN-OHL-1.2 license, which monero-project chose for the repository.
More boards in kastelo
Breakpanel
monero-project
145 × 165 mm105 parts2LCERN-OHL-1.2115AStable Timer LED Badge
monero-project
100 × 95 mm78 parts2LCERN-OHL-1.2115STM32
Ledgblue
monero-project
60.5 × 45.8 mm59 parts2LCERN-OHL-1.2115AVR/Arduino
DefcoNFC Hardware Badge
monero-project
70 × 100 mm31 parts2LCERN-OHL-1.2115HCPP NFC Hardware Badge
monero-project
80 × 71 mm5 parts2LCERN-OHL-1.2115USB-C Receptacle Tester
monero-project
66 × 21 mm3 parts2LCERN-OHL-1.2115