DefcoNFC Hardware Badge
monero-project·kastelo·hardware/confbadge/defconfc/defconfc.kicad_pcb
About the DefcoNFC Hardware Badge PCB
DefcoNFC Hardware Badge is an open source AVR/Arduino PCB design by monero-project, published on GitHub under the CERN-OHL-1.2 license. It is a 2-layer board measuring 70 × 100 mm, with 31 components from 10 distinct parts.
Its main chip is the ATTINY13A-SSU, from the AVR/Arduino family. Other key parts include the M24SR16-YMN6T/2. By type, the board carries 16 diodes, 4 switches, 4 resistors, 3 ICs, 1 connector and 1 antenna.
It belongs with the wearables designs in this gallery.
From the project
The Sekura Monero Hardware Wallet
[](https://github.com/monero-project/kastelo/)
1. Safe, Vault, a place to store valuables 2. An open hardware Monero wallet
https://taiga.getmonero.org/project/michael-rfc-hwallet-1-implementation/

Main components on the DefcoNFC Hardware Badge
DefcoNFC Hardware Badge bill of materials (BOM)
31 components, 10 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | M24SR16-YMN6T/2 | SOIC-8_3.9x4.9mm_Pitch1.27mm | U1, U2 |
| 1 | ATTINY13A-SSU | SOIC-8_3.9x4.9mm_Pitch1.27mm | U3 |
| 1 | Conn_02x03_Odd_Even | Pin_Header_Straight_2x03_Pitch2.54mm | J2 |
| 1 | Antenna_PCB | NFCAntennaloop | AE1 |
| 1 | Battery_Cell | Keystone_3034_1x2032-Coincell | BT1 |
| 1 | Kastelospecs | Kastelospecsqrcode | G2 |
| 3 | SW_SPST | SW_SPST_PTS645 | SW1, SW2, SW3 |
| 1 | SW_SPDT | SW_SPDT_CK-JS102011SAQN | SW4 |
| 16 | LED | LED_1206 | D1, D2, D3, D4, D5, D6, D7, D8 +8 |
| 4 | 220 | R_0805 | R1, R3, R5, R7 |
DefcoNFC Hardware Badge design files
The KiCad project lives in the monero-project/kastelo repository on GitHub; these links point at the commit this page was built from.
DefcoNFC Hardware Badge: common questions
What microcontroller does the DefcoNFC Hardware Badge use?
The DefcoNFC Hardware Badge is built around the ATTINY13A-SSU, from the AVR/Arduino family.
How big is the DefcoNFC Hardware Badge PCB?
The DefcoNFC Hardware Badge measures 70 × 100 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the DefcoNFC Hardware Badge?
31 components, from 10 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the DefcoNFC Hardware Badge design files?
From the monero-project/kastelo repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.
Can I use the DefcoNFC Hardware Badge design in my own project?
Yes, under the terms of its CERN-OHL-1.2 license, which monero-project chose for the repository.
Can I test firmware for the DefcoNFC Hardware Badge without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.
More boards in kastelo
Breakpanel
monero-project
145 × 165 mm105 parts2LCERN-OHL-1.2115Breakneck
monero-project
53.3 × 64 mm89 parts2LCERN-OHL-1.2115AStable Timer LED Badge
monero-project
100 × 95 mm78 parts2LCERN-OHL-1.2115STM32
Ledgblue
monero-project
60.5 × 45.8 mm59 parts2LCERN-OHL-1.2115HCPP NFC Hardware Badge
monero-project
80 × 71 mm5 parts2LCERN-OHL-1.2115USB-C Receptacle Tester
monero-project
66 × 21 mm3 parts2LCERN-OHL-1.2115
Similar boards
AVR/Arduino
Magspoof
samyk
35 × 29 mm11 parts2LNo license4.2kAVR/Arduino
Redox keyboard
mattdibi
162.2 × 126.5 mm77 parts2LMIT2.0kAVR/Arduino
Labrador
espotek-org
36.8 × 34.7 mm75 parts2LNo license1.2kAVR/Arduino
ModuleV450
stuartpittaway
30 × 61.4 mm39 parts2LCC-BY-NC-4.01.1kAVR/Arduino
V4
stuartpittaway
30 × 50 mm38 parts2LCC-BY-NC-4.01.1kAVR/Arduino
Discipline
coseyfannitutti
304.9 × 122.8 mm170 parts2LCC-BY-NC-4.01.0k