Breakpanel
monero-project·kastelo·hardware/breakneck/breakpanel.kicad_pcb
About the Breakpanel PCB
Breakpanel is an open source PCB design by monero-project, published on GitHub under the CERN-OHL-1.2 license. It is a 2-layer board measuring 145 × 165 mm, with 105 components from 48 distinct parts.
Other key parts include the ATECC508A, SST26VF064B, CEC1702, CP2102N and LN6206P33M. By type, the board carries 26 capacitors, 24 resistors, 10 connectors, 6 ICs, 5 diodes and 2 crystals.
From the project
The Sekura Monero Hardware Wallet
The Breakneck design includes rich features typical of a developer edition hardware wallet.
[](https://github.com/monero-project/kastelo/raw/master/hardware/breakneck/schematic/breakneck-sch.pdf)
[](https://raw.githubusercontent.com/monero-project/kastelo/master/hardware/breakneck/graphics/boardlaykicad.png) [](https://raw.githubusercontent.com/monero-project/kastelo/master/hardware/breakneck/graphics/boardlayoutrend.png) [](https://raw.githubusercontent.com/monero-project/kastelo/master/hardware/breakneck/graphics/boardrenderanim.gif)

Main components on the Breakpanel
Breakpanel bill of materials (BOM)
105 components, 48 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ATECC508A | DFN-8-1EP_2x3mm_Pitch0.5mm | U1 |
| 1 | SST26VF064B | DFN-S-8-1EP_6x5mm_Pitch1.27mm | U2 |
| 1 | CEC1702 | WFBGACEC1702 | U3 |
| 1 | CP2102N | QFN-28-1EP_5x5mm_Pitch0.5mm | U4 |
| 1 | LN6206P33M | SOT-23 | U6 |
| 1 | LN6206P15M | SOT-23 | U7 |
| 1 | Badgelife_shitty | Badgelife-Shitty-2x2 | X1 |
| 1 | Crystal | Crystal_SMD_3215-2Pin_3.2x1.5mm | Y1 |
| 1 | CONN_WEST | Pin_Header_Straight_1x20_Pitch2.54mm | J1 |
| 1 | CONN_DEDI | Pin_Header_Straight_2x04_Pitch2.54mm | J2 |
| 1 | CONN_OLED | Socket_Strip_Straight_1x07_Pitch2.54mm | J3 |
| 1 | USB_C_Receptacle | USB_C_Receptacle_Amphenol_12401610E4-2A | J4 |
| 1 | CONN_SOUTH | Pin_Header_Straight_1x14_Pitch2.54mm | J5 |
| 1 | CONN_EAST | Pin_Header_Straight_1x20_Pitch2.54mm | J6 |
| 2 | GS2 | R_0805 | J10, J15 |
| 1 | CONN_JTAG_6P | PinSocket_2x05_P2.54mm_Vertical | J12 |
| 1 | CONN_JST | JST_PH_B2B-PH-K_02x2.00mm_Straight | J16 |
| 1 | Battery_Cell | Keystone_3000_1x12mm-CoinCell | BT1 |
| 1 | ER-CON30 | Eastrising_ER-CON30HT-1_01x30_P0.50mm | DS1 |
| 2 | Jumper | Pin_Header_Angled_1x02_Pitch2.54mm | JP1, JP2 |
Show 28 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | SW_SPST | SW_SPST_K21102SP | SW1, SW2 |
| 12 | Mousetab_3Hole | Panel_Mousetab_25mm_Single | TAB1, TAB2, TAB5, TAB6, TAB11, TAB12, TAB15, TAB16 +4 |
| 14 | Panel_Mousetab_25mm_Double | Panel_Mousetab_25mm_Double | TAB3, TAB4, TAB7, TAB8, TAB9, TAB10, TAB13, TAB14 +6 |
| 1 | BAT54C | SOT-23 | D1 |
| 1 | SP0503BAHTG | SOT-143 | D2 |
| 1 | D_PMEG | D_SOD-123 | D5 |
| 2 | LED | LED_0805 | D6, D7 |
| 10 | 100nF | C_0805 | C1, C2, C8, C11, C15, C19, C21, C22 +2 |
| 2 | 470nF | C_0805 | C3, C14 |
| 11 | 1uF | C_0805 | C4, C5, C9, C10, C12, C18, C28, C29 +3 |
| 2 | 15pF | C_0805 | C6, C7 |
| 1 | 2.2uF | C_0805 | C13 |
| 2 | 0 | R_0805 | R1, R7 |
| 1 | 12K | R_0805 | R2 |
| 1 | 22K | R_0805 | R3 |
| 1 | 10K | R_0805 | R4 |
| 2 | 3.9K | R_0805 | R5, R6 |
| 4 | 100K | R_0805 | R8, R9, R11, R26 |
| 1 | 10 | R_0805 | R10 |
| 1 | 390K | R_0805 | R12 |
| 1 | 100 | R_0805 | R13 |
| 1 | 1.5K | R_0805 | R15 |
| 2 | 2.4K | R_0805 | R16, R17 |
| 1 | 22.1K | R_0805 | R18 |
| 1 | 47.5K | R_0805 | R19 |
| 2 | 220 | R_0805 | R20, R21 |
| 1 | 1K | R_0805 | R25 |
| 2 | 150 | R_0805 | R27, R28 |
Breakpanel design files
The KiCad project lives in the monero-project/kastelo repository on GitHub; these links point at the commit this page was built from.
Breakpanel: common questions
How big is the Breakpanel PCB?
The Breakpanel measures 145 × 165 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Breakpanel?
105 components, from 48 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Breakpanel design files?
From the monero-project/kastelo repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.
Can I use the Breakpanel design in my own project?
Yes, under the terms of its CERN-OHL-1.2 license, which monero-project chose for the repository.
More boards in kastelo
Breakneck
monero-project
53.3 × 64 mm89 parts2LCERN-OHL-1.2115AStable Timer LED Badge
monero-project
100 × 95 mm78 parts2LCERN-OHL-1.2115STM32
Ledgblue
monero-project
60.5 × 45.8 mm59 parts2LCERN-OHL-1.2115AVR/Arduino
DefcoNFC Hardware Badge
monero-project
70 × 100 mm31 parts2LCERN-OHL-1.2115HCPP NFC Hardware Badge
monero-project
80 × 71 mm5 parts2LCERN-OHL-1.2115USB-C Receptacle Tester
monero-project
66 × 21 mm3 parts2LCERN-OHL-1.2115