MoPsy Pwr Distributor
moPsy-project·moPsy-PSU·moPsy_Pwr_Distributor/moPsy_Pwr_Distributor.kicad_pcb
About the MoPsy Pwr Distributor PCB
MoPsy Pwr Distributor is an open source PCB design by moPsy-project, published on GitHub. It is a 2-layer board measuring 79 × 46 mm, with 39 components from 8 distinct parts.
By type, the board carries 30 connectors, 3 diodes, 3 capacitors and 3 resistors.
It belongs with the audio and power & battery designs in this gallery.
From the project
Power Supply Unit for my synthesizer
Please make sure you also have the moPsy-KiCad-resources available when opening these projects.
I am still in the design process and this is not the final revision. During the several design stages I have come up with ideas for a simpler design. However, at this stage, it would be more expensive to start over than to build what is available and learn from the iteration.

MoPsy Pwr Distributor bill of materials (BOM)
39 components, 8 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 20 | Conn_01x01_Male | Connector FS-P475 | J1, J2, J3, J4, J7, J8, J9, J10 +12 |
| 10 | Conn_01x01_Male | Pin_D0.9mm_L10.0mm_W2.4mm_FlatFork | J5, J6, J11, J12, J17, J18, J23, J24 +2 |
| 1 | rt | LED_D3.0mm | D1 |
| 1 | ye | LED_D3.0mm | D2 |
| 1 | bl | LED_D3.0mm | D3 |
| 3 | C | C_Rect_L7.0mm_W2.5mm_P5.00mm | C1, C3, C4 |
| 2 | 10k | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1, R2 |
| 1 | 22k | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R3 |
MoPsy Pwr Distributor design files
The KiCad project lives in the moPsy-project/moPsy-PSU repository on GitHub; these links point at the commit this page was built from.
MoPsy Pwr Distributor: common questions
How big is the MoPsy Pwr Distributor PCB?
The MoPsy Pwr Distributor measures 79 × 46 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the MoPsy Pwr Distributor?
39 components, from 8 distinct parts. The full bill of materials is listed on this page.
Where can I download the MoPsy Pwr Distributor design files?
From the moPsy-project/moPsy-PSU repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the MoPsy Pwr Distributor design in my own project?
The repository has no license, so all rights stay with moPsy-project. Use it as a reference, and ask the author before reusing the design.
More boards in moPsy-PSU
MoPsy Rectifier
moPsy-project
134.6 × 72.4 mm41 parts2LNo license0Mopsy BusBoard 3
moPsy-project
238 × 24 mm26 parts2LNo license0MoPsy BusBoard
moPsy-project
243.2 × 24 mm24 parts2LNo license0Mopsy BusBoard 4
moPsy-project
244 × 24 mm24 parts2LNo license0MoPsy Regulator 5Vpos BusGate
moPsy-project
64 × 40 mm21 parts2LNo license0MoPsy Regulator
moPsy-project
96.5 × 38.1 mm21 parts2LNo license0Mopsy BusBoard 2
moPsy-project
238 × 24 mm21 parts2LNo license0MoPsy Regulator 12Vneg
moPsy-project
41 × 40 mm15 parts2LNo license0MoPsy Regulator 12Vpos
moPsy-project
41 × 40 mm13 parts2LNo license0MoPsy CapCharger I
moPsy-project
31.8 × 38.1 mm13 parts2LNo license0
Similar boards
EinkPDA screen
TalismanDesign
95 × 54 mm27 parts2LApache-2.02.0kStack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7kDisplay Carrier
AxxAxx
35.6 × 58.2 mm5 parts2LGPL-3.01.7kKLOR
GEIGEIGEIST
160.2 × 118.3 mm79 parts2LGPL-3.01.2kProgrammingAdapter
stuartpittaway
10.5 × 83 mm3 parts2LCC-BY-NC-4.01.1kTemperaturePCB PANEL
stuartpittaway
116 × 75.5 mm178 parts2LCC-BY-NC-4.01.1k