MoPsy CapCharger I
moPsy-project·moPsy-PSU·moPsy_CapCharger_I/moPsy_CapCharger_I.kicad_pcb
About the MoPsy CapCharger I PCB
MoPsy CapCharger I is an open source PCB design by moPsy-project, published on GitHub. It is a 2-layer board measuring 31.8 × 38.1 mm, with 13 components from 12 distinct parts.
Other key parts include the LM79L12_TO92 and LM555xN. By type, the board carries 6 capacitors, 2 ICs, 2 diodes, 1 transistor, 1 connector and 1 resistor.
It belongs with the audio and power & battery designs in this gallery.
From the project
Power Supply Unit for my synthesizer
The big capacitors want to be charged slowly.
This is a first and very dump version of a charge controller. Just wait a while until the current limit is lifted and power is supplied to the Synthesizer.
Main components on the MoPsy CapCharger I
MoPsy CapCharger I bill of materials (BOM)
13 components, 12 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | LM79L12_TO92 | TO-92_Inline | U1 |
| 1 | LM555xN | DIP-8_W7.62mm | U2 |
| 1 | BC547 | TO-92_Inline | Q1 |
| 1 | Conn_01x08_Male | PinHeader_1x08_P2.54mm_Horizontal | J1 |
| 1 | 1N4001 | D_DO-41_SOD81_P7.62mm_Horizontal | D1 |
| 1 | 1N4148 | D_DO-41_SOD81_P7.62mm_Horizontal | D2 |
| 1 | 470u | C_Axial_L19.0mm_D9.5mm_P25.00mm_Horizontal | C1 |
| 1 | 33u | CP_Radial_D8.0mm_P3.50mm | C2 |
| 2 | 100n | C_Rect_L7.0mm_W2.5mm_P5.00mm | C3, C4 |
| 1 | 100u | CP_Radial_D8.0mm_P3.50mm | C5 |
| 1 | 10n | C_Rect_L7.0mm_W2.5mm_P5.00mm | C6 |
| 1 | 47k | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1 |
MoPsy CapCharger I design files
The KiCad project lives in the moPsy-project/moPsy-PSU repository on GitHub; these links point at the commit this page was built from.
MoPsy CapCharger I: common questions
How big is the MoPsy CapCharger I PCB?
The MoPsy CapCharger I measures 31.8 × 38.1 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the MoPsy CapCharger I?
13 components, from 12 distinct parts. The full bill of materials is listed on this page.
Where can I download the MoPsy CapCharger I design files?
From the moPsy-project/moPsy-PSU repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the MoPsy CapCharger I design in my own project?
The repository has no license, so all rights stay with moPsy-project. Use it as a reference, and ask the author before reusing the design.
More boards in moPsy-PSU
MoPsy Rectifier
moPsy-project
134.6 × 72.4 mm41 parts2LNo license0MoPsy Pwr Distributor
moPsy-project
79 × 46 mm39 parts2LNo license0Mopsy BusBoard 3
moPsy-project
238 × 24 mm26 parts2LNo license0MoPsy BusBoard
moPsy-project
243.2 × 24 mm24 parts2LNo license0Mopsy BusBoard 4
moPsy-project
244 × 24 mm24 parts2LNo license0MoPsy Regulator 5Vpos BusGate
moPsy-project
64 × 40 mm21 parts2LNo license0MoPsy Regulator
moPsy-project
96.5 × 38.1 mm21 parts2LNo license0Mopsy BusBoard 2
moPsy-project
238 × 24 mm21 parts2LNo license0MoPsy Regulator 12Vneg
moPsy-project
41 × 40 mm15 parts2LNo license0MoPsy Regulator 12Vpos
moPsy-project
41 × 40 mm13 parts2LNo license0
Similar boards
EinkPDA screen
TalismanDesign
95 × 54 mm27 parts2LApache-2.02.0kStack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7kDisplay Carrier
AxxAxx
35.6 × 58.2 mm5 parts2LGPL-3.01.7kKLOR
GEIGEIGEIST
160.2 × 118.3 mm79 parts2LGPL-3.01.2kProgrammingAdapter
stuartpittaway
10.5 × 83 mm3 parts2LCC-BY-NC-4.01.1kTemperaturePCB PANEL
stuartpittaway
116 × 75.5 mm178 parts2LCC-BY-NC-4.01.1k