XZ-Manipulator-Controls
MorisSintong·XZ-Manipulator-Controls·Hardware/XZ-Controller/XZ-Controller.kicad_pcb
About the XZ-Manipulator-Controls PCB
XZ-Manipulator-Controls is an open source PCB design by MorisSintong, published on GitHub. It is a 2-layer board, with 10 components from 7 distinct parts.
Other key parts include the NUCLEO-F446RE. By type, the board carries 7 connectors and 3 ICs.
It belongs with the robotics & motion and sensors designs in this gallery.
From the project
Integrasi Computer Vision dan Sistem Sortasi Konveyor untuk Pengendalian Kualitas (Quality Control) Komponen Kapasitor Berdasarkan Polaritas.
Integrasi Computer Vision dan Sistem Sortasi Konveyor untuk Pengendalian Kualitas (Quality Control) Komponen Kapasitor Berdasarkan Polaritas.
Undergraduate Thesis Engineering Repository (Tugas Akhir - Teknik Elektro / Sistem Komputer).
This repository houses the full-stack engineering implementation of an automated industrial inspection and sorting workcell for electrolytic capacitors: 1. Perception & Quality Control: Real-time overhead computer vision pipeline (YOLO + PCA continuous angle calculation) detecting capacitor polarity orientation and spatial coordinates on a moving conveyor…
Main components on the XZ-Manipulator-Controls
XZ-Manipulator-Controls bill of materials (BOM)
10 components, 7 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | NUCLEO-F446RE | MODULE_NUCLEO-F446RE | U1 |
| 2 | — | MODULE_TMC2209_SILENTSTEPSTICK | U2, U3 |
| 2 | Conn_01x04_Socket | JST_XH_B4B-XH-A_1x04_P2.50mm_Vertical | J1, J2 |
| 2 | Conn_01x05_Socket | JST_XH_B5B-XH-A_1x05_P2.50mm_Vertical | J3, J4 |
| 1 | Conn_01x03 | TerminalBlock_Phoenix_MPT-0,5-3-2.54_1x03_P2.54mm_Horizontal | J5 |
| 1 | Conn_02x05_Row_Letter_Last | PinSocket_2x05_P2.54mm_Vertical | J6 |
| 1 | Conn_01x02 | J8 |
XZ-Manipulator-Controls design files
The KiCad project lives in the MorisSintong/XZ-Manipulator-Controls repository on GitHub; these links point at the commit this page was built from.
XZ-Manipulator-Controls: common questions
How big is the XZ-Manipulator-Controls PCB?
The XZ-Manipulator-Controls has 2 copper layers and is 1.6 mm thick.
How many components are on the XZ-Manipulator-Controls?
10 components, from 7 distinct parts. The full bill of materials is listed on this page.
Where can I download the XZ-Manipulator-Controls design files?
From the MorisSintong/XZ-Manipulator-Controls repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the XZ-Manipulator-Controls design in my own project?
The repository has no license, so all rights stay with MorisSintong. Use it as a reference, and ask the author before reusing the design.
Similar boards
Sensor smd
scottbez1
40 × 20 mm5 parts2LApache-2.04.2kSensors
StuckAtPrototype
15.2 × 9 mm14 parts4LApache-2.03.8kStack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7kMicrophone
Mentra-Community
5.5 × 6.1 mm6 parts2LMIT1.2kTemperaturePCB PANEL
stuartpittaway
116 × 75.5 mm178 parts2LCC-BY-NC-4.01.1kCube batteryboard
willem-pennings
95 × 95 mm4 parts2LGPL-3.01.1k