4Channe Mixer
About the 4Channe Mixer PCB
4Channe Mixer is an open source PCB design by mort13, published on GitHub under the GPL-3.0 license. It is a 2-layer board measuring 49.5 × 98 mm, with 39 components from 11 distinct parts.
Other key parts include the TL074. By type, the board carries 18 resistors, 6 connectors, 4 capacitors, 2 diodes and 1 IC.
It belongs with the audio designs in this gallery.
From the project
Collection of diy synth projects
Main components on the 4Channe Mixer
4Channe Mixer bill of materials (BOM)
39 components, 11 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | TL074 | tl74 | U1 |
| 1 | 1-1002FBV0T Eurorack_Power_10pin_Unshrouded TAD | PinSocket_2x05_P2.54mm_Vertical | J1 |
| 5 | AUDIOJACK3 AudioJack3 | Jack_3.5mm_QingPu_WQP-PJ366ST_Vertical | J2, J3, J4, J5, J6 |
| 8 | 100k B | Potentiometer_Alpha_RD901F-40-00D_Single_Vertical_withhole | RV1, RV2, RV3, RV4, RV6, RV7, RV8, RV9 |
| 2 | 1N5819 | D_DO-41_SOD81_P2.54mm_Vertical_AnodeUp | D1, D2 |
| 2 | 0603YC104KAT2A 0.1uF_0603_16V AVX Corporation | C_Disc_D5.0mm_W2.5mm_P5.00mm | C1, C2 |
| 2 | VE-470M1CTR-0505 47uF_5x5.3_16V Lelon | CP_Radial_D4.0mm_P2.00mm | C5, C6 |
| 12 | 100K 100k | R_Axial_DIN0204_L3.6mm_D1.6mm_P1.90mm_Vertical | R1, R2, R3, R4, R5, R6, R10, R11 +4 |
| 2 | 1k | R_Axial_DIN0204_L3.6mm_D1.6mm_P1.90mm_Vertical | R8, R18 |
| 2 | 50K 50k | R_Axial_DIN0204_L3.6mm_D1.6mm_P1.90mm_Vertical | R9, R17 |
| 2 | 10 | R_Axial_DIN0204_L3.6mm_D1.6mm_P1.90mm_Vertical | R37, R38 |
4Channe Mixer design files
The KiCad project lives in the mort13/clandestine_circuitry repository on GitHub; these links point at the commit this page was built from.
4Channe Mixer: common questions
How big is the 4Channe Mixer PCB?
The 4Channe Mixer measures 49.5 × 98 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the 4Channe Mixer?
39 components, from 11 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the 4Channe Mixer design files?
From the mort13/clandestine_circuitry repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the 4Channe Mixer design in my own project?
Yes, under the terms of its GPL-3.0 license, which mort13 chose for the repository.
More boards in clandestine_circuitry
STM32Marbles v70
88.9 × 106.1 mm207 parts2LGPL-3.012
Teletype-180824
88.9 × 109.9 mm172 parts4LGPL-3.012
VCO-3340
48.8 × 110 mm102 parts2LGPL-3.012
Wave Folder
35.6 × 110 mm80 parts2LGPL-3.012
VCA Panner
43 × 110 mm79 parts2LGPL-3.012
Confluence
20.3 × 113 mm69 parts2LGPL-3.012
Splt mlt
26 × 110 mm53 parts2LGPL-3.012
Feitw
19.1 × 100 mm40 parts2LGPL-3.012
Sloth
19.1 × 110 mm40 parts2LGPL-3.012
Split mult
23 × 100 mm23 parts2LGPL-3.012
Similar boards
OtterCastAudioV2
Ottercast
50 × 49.3 mm216 parts4LMIT665
FunBox
GuitarML
59.7 × 67.5 mm63 parts2LMIT278
Eurorack pmod
apfaudio
35 × 110 mm116 parts4LCERN-OHL-S-2.0239
XassetteAsterisk
SdtElectronics
56 × 56 mm137 parts2LCERN-OHL-W-2.0229
AddOnC
freeDSP
380 × 45 mm97 parts2LCC-BY-SA-4.0222
AddOnA
178 × 39 mm55 parts2LCC-BY-SA-4.0222