HardLabs

2021-2022 Viallaneix Sottas Noual

MOSH-Insa-Toulouse·2021-2022_Viallaneix_Sottas_Noual·Shield/Shield.kicad_pcb

2021-2022 Viallaneix Sottas Noual PCB layout, top view — open source AVR/Arduino board by MOSH-Insa-Toulouse

About the 2021-2022 Viallaneix Sottas Noual PCB

2021-2022 Viallaneix Sottas Noual is an open source AVR/Arduino PCB design by MOSH-Insa-Toulouse, published on GitHub. It is a 2-layer board measuring 76.2 × 61 mm, with 22 components from 16 distinct parts.

Its main chip is the Arduino_1pin, from the AVR/Arduino family. Other key parts include the LTC1050-Test, EncodeurRot, OLED, Bluetooth and MCP41100. By type, the board carries 8 connectors, 5 ICs, 4 capacitors and 4 resistors.

It belongs with the sensors and dev boards & breakouts designs in this gallery.

From the project

Granulometric sensor - MOSH project 2022.

## Les axes du projets Présentation du capteur granulométrique Acquisition des données Carte Arduino Étude du circuit électrique Partie 1: Mesure d'un très faible courant avec l'aide d'un micro-contrôleur Vérification avec la Datasheet de l'AOP Partie 2: Mise en oeuvre du filtrage du signal Schéma du circuit électronique final Partie 3: Simulations sous LTSpice Code Arduino du système Application sur Android Réalisation du PCB Partie 1: Conception de la schématique et des connexions entre les composants électroniques Partie 2: Conception du PCB Partie 3: Soudure des composants sur le PCB et…

2021-2022 Viallaneix Sottas Noual, from the project README
From the project README

Main components on the 2021-2022 Viallaneix Sottas Noual

LTC1050-TestEncodeurRotOLEDBluetoothMCP41100

2021-2022 Viallaneix Sottas Noual bill of materials (BOM)

22 components, 16 distinct parts.

QtyPartRefs
1
LTC1050-Test
U1
1
EncodeurRot
U2
1
OLED
U3
1
Bluetooth
U4
1
MCP41100
U5
1
Power
P1
1
Analog
P2
1
Digital
P3
1
Digital
P4
4
CONN_01X01
P5, P6, P7, P8
1
R
Rsens1
3
100n
C1, C2, C3
1
1u
C4
2
100k
R1, R3
1
10k
R5
1
1k
R6

2021-2022 Viallaneix Sottas Noual design files

The KiCad project lives in the MOSH-Insa-Toulouse/2021-2022_Viallaneix_Sottas_Noual repository on GitHub; these links point at the commit this page was built from.

2021-2022 Viallaneix Sottas Noual: common questions

What microcontroller does the 2021-2022 Viallaneix Sottas Noual use?

The 2021-2022 Viallaneix Sottas Noual is built around the Arduino_1pin, from the AVR/Arduino family.

How big is the 2021-2022 Viallaneix Sottas Noual PCB?

The 2021-2022 Viallaneix Sottas Noual measures 76.2 × 61 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the 2021-2022 Viallaneix Sottas Noual?

22 components, from 16 distinct parts. The full bill of materials is listed on this page.

Where can I download the 2021-2022 Viallaneix Sottas Noual design files?

From the MOSH-Insa-Toulouse/2021-2022_Viallaneix_Sottas_Noual repository on GitHub, which has the KiCad layout; the links under Design files point to each one.

Can I use the 2021-2022 Viallaneix Sottas Noual design in my own project?

The repository has no license, so all rights stay with MOSH-Insa-Toulouse. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the 2021-2022 Viallaneix Sottas Noual without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.

Similar boards