Stm32-usbcpd trigger
About the Stm32-usbcpd trigger PCB
Stm32-usbcpd trigger is an open source STM32 PCB design by mothenjoyer69, published on GitHub under the MIT license. It is a 2-layer board measuring 24.4 × 14 mm, with 22 components from 16 distinct parts.
Its main chip is the STM32F030F4Px, from the STM32 family. Other key parts include the FUSB302B01MPX and NCP718. By type, the board carries 9 capacitors, 4 connectors, 3 ICs, 3 resistors, 2 diodes and 1 switch.
Main components on the Stm32-usbcpd trigger
Stm32-usbcpd trigger bill of materials (BOM)
22 components, 16 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | FUSB302B01MPX | WQFN-14-1EP_2.5x2.5mm_P0.5mm_EP1.45x1.45mm | U1 |
| 1 | STM32F030F4Px | TSSOP-20_4.4x6.5mm_P0.65mm | U2 |
| 1 | NCP718 | SOT-23-5 | U3 |
| 1 | USB_C_Receptacle_USB2.0 | USB_C_Receptacle_HRO_TYPE-C-31-M-12 | J1 |
| 1 | Conn_01x02_Socket | PinHeader_1x03_P2.00mm_Vertical | J2 |
| 1 | VBUS | PinHeader_1x01_P2.54mm_Vertical | J3 |
| 1 | GND | PinHeader_1x01_P2.54mm_Vertical | J4 |
| 1 | SW_Push | SW_SPST_CK_KXT3 | SW1 |
| 1 | LED | LED_0805_2012Metric | D1 |
| 1 | D | D_0402_1005Metric | D4 |
| 4 | 100nF | C_0402_1005Metric | C1, C6, C9, C10 |
| 2 | 1uF | C_0402_1005Metric | C2, C5 |
| 1 | 470nF | C_0402_1005Metric | C3 |
| 2 | 100pF | C_0402_1005Metric | C7, C8 |
| 2 | 2.2k | R_0402_1005Metric | R1, R3 |
| 1 | 3k | R_0402_1005Metric | R2 |
Stm32-usbcpd trigger design files
The KiCad project lives in the mothenjoyer69/pcb-design-files repository on GitHub; these links point at the commit this page was built from.
Stm32-usbcpd trigger: common questions
What microcontroller does the Stm32-usbcpd trigger use?
The Stm32-usbcpd trigger is built around the STM32F030F4Px, from the STM32 family.
How big is the Stm32-usbcpd trigger PCB?
The Stm32-usbcpd trigger measures 24.4 × 14 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Stm32-usbcpd trigger?
22 components, from 16 distinct parts. The full bill of materials is listed on this page.
Where can I download the Stm32-usbcpd trigger design files?
From the mothenjoyer69/pcb-design-files repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Stm32-usbcpd trigger design in my own project?
Yes, under the terms of its MIT license, which mothenjoyer69 chose for the repository.
Can I test firmware for the Stm32-usbcpd trigger without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
More boards in pcb-design-files
RP2040/RP2350D2000-mitx
170 × 170 mm465 parts6LMIT1
Raspberry PiCm4-printing deck
100.4 × 92.9 mm84 parts4LMIT1
RP2040/RP2350Gods goofiest macroboard
104.2 × 118.7 mm71 parts2LMIT1
RP2040/RP2350Simple rp235x
59 × 21.5 mm46 parts2LMIT1
RP2040/RP2350D2000-m.2-EC
26 × 40 mm39 parts4LMIT1
AVR/ArduinoAttiny84-usbc
27.6 × 17.9 mm20 parts2LMIT1
Altmode carrier
38.2 × 25.5 mm19 parts4LMIT1
Usbc breakout passthrough
23.1 × 20.3 mm9 parts2LMIT1
Usbc breakout
9.8 × 9.3 mm7 parts2LMIT1
Ccd chromebook
22.7 × 12.5 mm7 parts2LMIT1
Oculink dgff-7540
80.5 × 99.8 mm6 parts6LMIT1
Similar boards
STM32LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7k
STM32AxxSolder
AxxAxx
39 × 82.5 mm122 parts2LGPL-3.01.7k
STM32LibreVNA
jankae
122 × 98 mm592 parts6LGPL-3.01.6k
STM32AIOC
skuep
21 × 31.5 mm47 parts2LMIT1.4k
STM32Ferris
pierrechevalier83
208.8 × 86.8 mm102 parts2LSHL-2.11.3k
STM32176 pin board
rusefi
61.8 × 73.2 mm76 parts2LGPL-3.01.2k