HardLabs

D2000-mitx

mothenjoyer69·pcb-design-files·d2000-mitx/d2000-mitx/d2000-mitx.kicad_pcb

D2000-mitx PCB layout, top view — open source RP2040/RP2350 board by mothenjoyer69
Simulate this board

About the D2000-mitx PCB

D2000-mitx is an open source RP2040/RP2350 PCB design by mothenjoyer69, published on GitHub under the MIT license. It is a 6-layer board measuring 170 × 170 mm, with 465 components from 83 distinct parts.

Its main chip is the RP2040, from the RP2040/RP2350 family. Other key parts include the USB7016/KDX, AP2112K-1.8, SI52147-A01AGM, MP8796GVT-P-1 and FUSB302B01MPX. By type, the board carries 297 capacitors, 128 resistors, 14 connectors, 13 ICs, 3 transistors and 3 crystals.

Main components on the D2000-mitx

USB7016/KDXAP2112K-1.8SI52147-A01AGMMP8796GVT-P-1FUSB302B01MPXW25Q32JVSSVL805 REAR I/OTPS784105QWDRBRQ1RP2040MP8796GVT-P-2

D2000-mitx bill of materials (BOM)

465 components, 83 distinct parts.

QtyPartRefs
1
USB7016/KDX
USB7016_KDX
IC1
1
AP2112K-1.8
U1
1
SI52147-A01AGM
U2
1
MP8796GVT-P-1
U3
1
FUSB302B01MPX
U4
1
~
U5
1
W25Q32JVSS
U8
2
VL805 REAR I/O
U9, U12
2
TPS784105QWDRBRQ1
U10, U11
1
RP2040
U13
1
MP8796GVT-P-2
U15
3
2N7002
Q1, Q2, Q3
2
Crystal_GND23
Y1, Y2
1
12MHz
Y3
1
2EG08217-D2D-DF
CN1
1
39281243
CN2
1
APCI0079-P002A
CN3
1
USB 3.1 + PD INPUT
J1
2
124B-150A12
J2, J9
1
Micro_SD_Card
J3
Show 63 more
QtyPartRefs
1
M.2_NVME0
J4
1
6116151-1
J6
1
39-29-9042
J10
1
M.2_NVME1
J11
1
USB3_A0
J12
1
USB3_A1
J13
1
CPUSOCKET_CPUSOCKET_FT2000_4_65
J32
1
DS1129-05-S80BP-X
RJ1
1
LIFE_LED
D1
2
LED
D2, D3
2
0.22uH
L1, L2
1
1uH
L3
4
100n
C1, C2, C7, C8
18
10uF
C3, C4, C9, C10, C91, C92, C135, C136 +10
6
22pF
C5, C6, C11, C12, C13, C14
70
0.22uF
C15, C16, C17, C18, C19, C20, C21, C22 +62
78
0.1uF
C75, C76, C77, C78, C79, C80, C93, C94 +70
6
4.7uF
C89, C90, C143, C144, C187, C190
8
560uF
C117, C118, C119, C120, C145, C146, C147, C148
32
22uF
C121, C122, C123, C124, C125, C126, C127, C128 +24
6
4.7uF
C197, C200, C220, C221, C239, C240
2
270uF
C198, C199
10
0.1uF
C201, C202, C203, C204, C222, C230, C231, C242 +2
1
4.7uF
C205
4
270uF
C211, C212, C213, C214
5
1uF
C215, C244, C258, C259, C261
2
100pF
C216, C243
15
22uF
C217, C218, C219, C237, C238, C241, C262, C263 +7
2
0.22uF
C223, C245
12
47uF
C224, C225, C226, C227, C246, C247, C248, C249 +4
8
10uF
C228, C229, C250, C252, C278, C279, C280, C281
3
560uF
C232, C233, C234
1
2.2nF
C235
1
10nF (NC)
C236
2
18pF
C260, C282
1
560uF
C266
2
6.04k
R1, R3
2
15k
R2, R4
21
10k
R5, R12, R13, R14, R17, R18, R19, R67 +13
2
1K
R6, R9
14
22R
R7, R8, R119, R120, R121, R122, R123, R124 +6
4
3.01k
R15, R16, R20, R21
2
240r
R22, R23
10
4.7k
R24, R28, R29, R34, R35, R36, R39, R41 +2
6
4.7k (NC)
R25, R26, R27, R37, R38, R40
2
0r
R30, R44
4
1k
R31, R33, R43, R45
2
1k (NC)
R32, R42
17
4.7k
R48, R49, R52, R53, R54, R59, R75, R109 +9
3
0r (NC)
R50, R62, R77
1
0.01r
R51
16
0r
R55, R56, R57, R58, R60, R61, R65, R70 +8
2
2.2r
R63, R78
2
60.4k
R64, R79
4
100k
R66, R95, R96, R97
2
30.1k
R71, R84
1
680r
R83
1
560r
R85
1
200k
R89
1
44.2k
R90
4
560r
R91, R92, R102, R103
1
5.11r
R98
1
0.01r
R99

D2000-mitx design files

The KiCad project lives in the mothenjoyer69/pcb-design-files repository on GitHub; these links point at the commit this page was built from.

D2000-mitx: common questions

What microcontroller does the D2000-mitx use?

The D2000-mitx is built around the RP2040, from the RP2040/RP2350 family.

How big is the D2000-mitx PCB?

The D2000-mitx measures 170 × 170 mm, has 6 copper layers and is 1.566 mm thick.

How many components are on the D2000-mitx?

465 components, from 83 distinct parts. The full bill of materials is listed on this page.

Where can I download the D2000-mitx design files?

From the mothenjoyer69/pcb-design-files repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the D2000-mitx design in my own project?

Yes, under the terms of its MIT license, which mothenjoyer69 chose for the repository.

Can I test firmware for the D2000-mitx without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.

More boards in pcb-design-files

Similar boards