APRS Mini Repeater
motivemachine·APRS_Mini_Repeater·hardware/v1.0/APRS_MicroNode.kicad_pcb
About the APRS Mini Repeater PCB
APRS Mini Repeater is an open source PCB design by motivemachine, published on GitHub. It is a 2-layer board measuring 54 × 97.8 mm, with 32 components from 18 distinct parts.
Other key parts include the AZ1117-ADJ and NanoModem. By type, the board carries 9 resistors, 7 capacitors, 4 diodes, 3 inductors, 2 ICs and 2 switches.
It belongs with the power & battery designs in this gallery.
From the project
A 1 watt battery operated APRS position transponder and mini repeater. This repo is a mirror for:
This PCB uses the nano-modem board I developed here: [APRS Nanomodem]https://gitlab.com/motivemachine/aprs-nanomodem Which is based on the Arduino TNC circuit and library developed by Mark Qvist here: unsigned.io
Writing the code has just started. I'll get the smart beaconing working first, then start in on the repeater functions and [hopefully] get it to conform with the APRS repeater WIDEn-N standard: APRS 101
Main components on the APRS Mini Repeater
APRS Mini Repeater bill of materials (BOM)
32 components, 18 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | AZ1117-ADJ | TO-252-3_TabPin2 | U1 |
| 1 | NanoModem | Nanomodem_TNC_2.0 | U2 |
| 1 | Q_PNP_BEC | SOT-23 | Q4 |
| 1 | Barrel_Jack | PinHeader_1x02_P2.54mm_Vertical | J1 |
| 1 | Series_2_batteries | 18650_Double_Holder | 2x 18650s in series |
| 1 | DRA818 | DRA818 | DRA818 |
| 2 | SW_Push | SW_PUSH_6mm_H5mm | SW1, SW2 |
| 1 | SPDT | PinHeader_1x03_P2.54mm_Vertical | sw_tg1 |
| 4 | LED | LED_0805_2012Metric | D1, D2, D3, D4 |
| 3 | L | L_0805_2012Metric | L1, L2, L3 |
| 1 | 10uf | CP_EIA-2012-12_Kemet-R_Pad1.30x1.05mm_HandSolder | C1 |
| 1 | 22uf | CP_EIA-2012-12_Kemet-R_Pad1.30x1.05mm_HandSolder | C2 |
| 1 | 1uf | C_0805_2012Metric | C3 |
| 4 | C | C_0805_2012Metric | C12, C13, C14, C15 |
| 6 | R | R_0805_2012Metric | R1, R2, R5, R6, R7, R8 |
| 1 | 470 | R_0805_2012Metric | R3 |
| 1 | 1k2 | R_0805_2012Metric | R4 |
| 1 | 100k | R_0805_2012Metric | R20 |
APRS Mini Repeater design files
The KiCad project lives in the motivemachine/APRS_Mini_Repeater repository on GitHub; these links point at the commit this page was built from.
APRS Mini Repeater: common questions
How big is the APRS Mini Repeater PCB?
The APRS Mini Repeater measures 54 × 97.8 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the APRS Mini Repeater?
32 components, from 18 distinct parts. The full bill of materials is listed on this page.
Where can I download the APRS Mini Repeater design files?
From the motivemachine/APRS_Mini_Repeater repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the APRS Mini Repeater design in my own project?
The repository has no license, so all rights stay with motivemachine. Use it as a reference, and ask the author before reusing the design.
Similar boards
EinkPDA screen
TalismanDesign
95 × 54 mm27 parts2LApache-2.02.0kStack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7kDisplay Carrier
AxxAxx
35.6 × 58.2 mm5 parts2LGPL-3.01.7kProgrammingAdapter
stuartpittaway
10.5 × 83 mm3 parts2LCC-BY-NC-4.01.1kTemperaturePCB PANEL
stuartpittaway
116 × 75.5 mm178 parts2LCC-BY-NC-4.01.1kModule 16S PassiveBalanceAddOn
stuartpittaway
61 × 74 mm86 parts2LCC-BY-NC-4.01.1k