Genesis Advanced UV 1-1
About the Genesis Advanced UV 1-1 PCB
Genesis Advanced UV 1-1 is an open source PCB design by MouseBiteLabs, published on GitHub under the CC-BY-SA-4.0 license. It is a 2-layer board measuring 83.8 × 61 mm, with 48 components from 17 distinct parts.
Other key parts include the 27C322, AS6C62256, 74HC74 and 74LS139. By type, the board carries 15 resistors, 13 diodes, 4 ICs, 4 capacitors, 3 test points and 2 transistors.
From the project
A collection of Genesis/Mega Drive cartridge circuit boards
This is a Sega Genesis/Mega Drive cartridge circuit board design that uses the older UV EPROMs, 27C322 or 27C160. This is the updated version of my existing carts, ported from Eagle to KiCad with some minor changes, but fully open source. With this board, unlike the flash version, you need to program the EPROM before soldering to the board. This cartridge is made entirely from off the shelf components. No donors are required.
Main components on the Genesis Advanced UV 1-1
Genesis Advanced UV 1-1 bill of materials (BOM)
48 components, 17 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 27C322 | DIP-42_W15.24mm | U1 |
| 1 | AS6C62256 | DIP-28_W15.24mm_DUAL | U2 |
| 1 | 74HC74 | DIP-14_W7.62mm | U3 |
| 1 | 74LS139 | DIP-16_W7.62mm | U4 |
| 1 | 2N3904 | TO-92L_Inline_Wide | Q1A1 |
| 1 | MMBT3904 | SOT-23 | Q1B1 |
| 1 | Genesis Cartridge | GENESIS_CART | P1 |
| 1 | CR2025 | COIN_CELL | B1 |
| 5 | Jumper_2_Open | SJ | SJ1, SJ2, SJ3, SJ4, SJ5 |
| 3 | TPB1,27 | TestPoint_THTPad_D1.5mm_Drill0.7mm | TP1, TP2, TP3 |
| 3 | D | DIODE_THT_SMT | D1, D2, D3 |
| 10 | LED | LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D10, D11, D12, D13, D14, D15, D16, D17 +2 |
| 4 | 0.1u | THT_SMT_0803_SHORT | C1, C2, C3, C4 |
| 1 | 1k | THT_SMT_0803 | R1 |
| 1 | 100k | THT_SMT_0803 | R2 |
| 3 | 10k | THT_SMT_0803 | R3, R4, R5 |
| 10 | 10k | R_0603_1608Metric_Boxed | R10, R11, R12, R13, R14, R15, R16, R17 +2 |
Genesis Advanced UV 1-1 design files
The KiCad project lives in the MouseBiteLabs/Genesis-Cartridges repository on GitHub; these links point at the commit this page was built from.
Genesis Advanced UV 1-1: common questions
How big is the Genesis Advanced UV 1-1 PCB?
The Genesis Advanced UV 1-1 measures 83.8 × 61 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Genesis Advanced UV 1-1?
48 components, from 17 distinct parts. The full bill of materials is listed on this page.
Where can I download the Genesis Advanced UV 1-1 design files?
From the MouseBiteLabs/Genesis-Cartridges repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Genesis Advanced UV 1-1 design in my own project?
Yes, under the terms of its CC-BY-SA-4.0 license, which MouseBiteLabs chose for the repository.
