16 open source boards using the AS6C62256

Real designs built with the AS6C62256, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

16 boardsClear filters|Most starred

How designs wire the AS6C62256

Read from the KiCad layouts of 12 open source designs, one per repository: what each pin of the AS6C62256 connects to, and the resistors, capacitors and other passives placed on it.

  • The VCC pin has a decoupling capacitor on 7 of 12 designs, most often 100 nF (then 1 µF).
GNDpin 14Connected to: GND 100%
VCCpin 28Connected to: 5V 92%
  • Decoupling capacitor on 58% · 100 nF (5), 1 µF (2), 10 nF (2)

26 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include SCOPETREX by schlae, Radio-86rk by skiselev, SBC3.1 by jacobtohahn and Genesis advanced flash 1-1 by MouseBiteLabs.

The AS6C62256 in open source designs

The gallery holds 16 open source boards using the AS6C62256 from 12 GitHub repositories; a typical one measures about 137.5 × 99.5 mm and carries around 62 components.

94% are two-layer designs, the rest use four layers or more, and 69% carry an open source license.

The most starred is SCOPETREX by schlae.

Microcontrollers on boards using the AS6C62256

What boards using the AS6C62256 are built for

AS6C62256: common questions

Where can I find a AS6C62256 reference design?

Each of the 16 boards on this page is a real design using the AS6C62256. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What decoupling capacitors do designs use on the AS6C62256 VCC pin?

The VCC pin has a decoupling capacitor on 7 of 12 designs, most often 100 nF (then 1 µF). Counted from the KiCad layouts of 12 open source designs using the AS6C62256.

What parts are used alongside the AS6C62256?

The 74LS00, AT28C256, MAX232, 28C256 and 28C64 appear in the most repositories here.

Which microcontrollers do boards using the AS6C62256 use?

Most are built on AVR/Arduino (2) and RP2040/RP2350 (1).

How big is a typical board using the AS6C62256?

The median is 137.5 × 99.5 mm, and 94% are two-layer designs.

What is the most popular open source board using the AS6C62256?

By GitHub stars, SCOPETREX by schlae, with 245 stars.

Can I simulate one of these boards using the AS6C62256 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part