Genesis advanced flash 1-1
About the Genesis advanced flash 1-1 PCB
Genesis advanced flash 1-1 is an open source PCB design by MouseBiteLabs, published on GitHub under the CC-BY-SA-4.0 license. It is a 2-layer board measuring 83.8 × 61 mm, with 42 components from 16 distinct parts.
Other key parts include the 29F160, 74HCT139, AS6C62256, TPS3613 and 74HCT74. By type, the board carries 13 resistors, 10 diodes, 7 ICs, 7 capacitors, 2 jumpers and 1 connector.
From the project
A collection of Genesis/Mega Drive cartridge circuit boards
This is a Sega Genesis/Mega Drive cartridge circuit board design that is capable of being flashed via the Open Source Cart Reader (OSCR) by sanni. Alternatively, you can also flash the ROM chips before soldering them to the board through the use of a programmer like the T48 programmer with the TSOP48 adapter. This cartridge is made entirely from brand new off the shelf components. No donors are required, and you don't need to rely on AliExpress or eBay for parts!
Main components on the Genesis advanced flash 1-1
Genesis advanced flash 1-1 bill of materials (BOM)
42 components, 16 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | 29F160 | TSOP-I-48_18.4x12mm_P0.5mm | U1, U2 |
| 2 | 74HCT139 | TSSOP-16_4.4x5mm_P0.65mm | U3, U7 |
| 1 | AS6C62256 | SO28 | U4 |
| 1 | TPS3613 | MSOP-10_3x3mm_P0.5mm | U5 |
| 1 | 74HCT74 | TSSOP-14_4.4x5mm_P0.65mm | U6 |
| 1 | Genesis Cartridge | GENESIS_CART | P1 |
| 1 | CR2025 | COIN_CELL | B1 |
| 2 | Jumper_2_Open | SJ | JP3, JP7 |
| 1 | SW_SPDT | CAS120B | SW1 |
| 10 | LED | LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D10, D11, D12, D13, D14, D15, D16, D17 +2 |
| 4 | 0.1u | C_0603_1608Metric_Boxed | C1, C4, C6, C7 |
| 3 | 0.1uF | C_0603_1608Metric_Boxed | C2, C3, C5 |
| 1 | 1k | R_0603_1608Metric_Boxed | R1 |
| 1 | 130k | R_0603_1608Metric_Boxed | R2 |
| 1 | 49.9k | R_0603_1608Metric_Boxed | R3 |
| 10 | 10k | R_0603_1608Metric_Boxed | R10, R11, R12, R13, R14, R15, R16, R17 +2 |
Genesis advanced flash 1-1 design files
The KiCad project lives in the MouseBiteLabs/Genesis-Cartridges repository on GitHub; these links point at the commit this page was built from.
Genesis advanced flash 1-1: common questions
How big is the Genesis advanced flash 1-1 PCB?
The Genesis advanced flash 1-1 measures 83.8 × 61 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Genesis advanced flash 1-1?
42 components, from 16 distinct parts. The full bill of materials is listed on this page.
Where can I download the Genesis advanced flash 1-1 design files?
From the MouseBiteLabs/Genesis-Cartridges repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Genesis advanced flash 1-1 design in my own project?
Yes, under the terms of its CC-BY-SA-4.0 license, which MouseBiteLabs chose for the repository.
