Supermini lipo motor
mqce·supermini-lipo-motor
About the Supermini lipo motor PCB
Supermini lipo motor is an open source PCB design by mqce, published on GitHub. It is a 2-layer board measuring 18 × 24 mm, with 20 components from 10 distinct parts.
Other key parts include the TC118S and TP4056. By type, the board carries 9 capacitors, 6 resistors, 3 ICs, 1 LED and 1 diode.
It belongs with the power & battery designs in this gallery.
From the project
ESP32-C3 SuperMini の下に重ねる、2 モーター駆動と LiPo 充電の拡張基板です。外形は 18 × 24 mm、2 層です。回路図のリビジョンは 1(2026-11-01)です。
ESP32-C3 SuperMini の下に重ねる、2 モーター駆動と LiPo 充電の拡張基板です。外形は 18 × 24 mm、2 層です。回路図のリビジョンは 1(2026-11-01)です。
SuperMini のピンヘッダ(2.54 mm、左右 1×8)に合わせたスルーホールで接続します。電池、電源スイッチ、モーターは基板端の手はんだパッド(1.5 mm ピッチ、ドリル 0.7 mm)へ配線します。
J3 の SWBAT(VBAT)と SWLOAD(VSW)のあいだに電源スイッチを入れます。スイッチを入れると電池が TC118S に供給されます。
D1(B5819W)はカソードが V5、アノードが VSW です。スイッチオンのとき電池から SuperMini の 5V ピンへ給電し、USB の 5V はモーター電源へ流れません。
Main components on the Supermini lipo motor
Supermini lipo motor bill of materials (BOM)
20 components, 10 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | TC118S | SOIC-8_3.9x4.9mm_P1.27mm | U1, U2 |
| 1 | TP4056 | SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.41x3.3mm | U3 |
| 1 | KT-0603R RED | LED_0603_1608Metric | LED1 |
| 1 | B5819W | D_SOD-123 | D1 |
| 4 | C19702 10uF | C_0603_1608Metric | C1, C2, C3, C5 |
| 4 | C1525 100nF | C_0402_1005Metric | C4, C6, C7, C8 |
| 1 | C45783 22uF | C_0805_2012Metric | C9 |
| 1 | 0603WAF1002T5E 10k | R_0603_1608Metric | R1 |
| 1 | 0402WGF1001TCE 1k | R_0402_1005Metric | R2 |
| 4 | 0402WGF1000TCE 100 | R_0402_1005Metric | R3, R4, R5, R6 |
Supermini lipo motor design files
The KiCad project lives in the mqce/supermini-lipo-motor repository on GitHub; these links point at the commit this page was built from.
Supermini lipo motor: common questions
How big is the Supermini lipo motor PCB?
The Supermini lipo motor measures 18 × 24 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Supermini lipo motor?
20 components, from 10 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Supermini lipo motor design files?
From the mqce/supermini-lipo-motor repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Supermini lipo motor design in my own project?
The repository has no license, so all rights stay with mqce. Use it as a reference, and ask the author before reusing the design.
Similar boards
EinkPDA screen
TalismanDesign
95 × 54 mm27 parts2LApache-2.02.0kStack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7kDisplay Carrier
AxxAxx
35.6 × 58.2 mm5 parts2LGPL-3.01.7kProgrammingAdapter
stuartpittaway
10.5 × 83 mm3 parts2LCC-BY-NC-4.01.1kTemperaturePCB PANEL
stuartpittaway
116 × 75.5 mm178 parts2LCC-BY-NC-4.01.1kModule 16S PassiveBalanceAddOn
stuartpittaway
61 × 74 mm86 parts2LCC-BY-NC-4.01.1k