HardLabs

MRev

MrFriedOk·flickerflame·experience/keebored/keebored/mRev/mRev.kicad_pcb

MRev PCB layout, top view — open source RP2040/RP2350 board by MrFriedOk

About the MRev PCB

MRev is an open source RP2040/RP2350 PCB design by MrFriedOk, published on GitHub. It is a 2-layer board measuring 60 × 50 mm, with 60 components from 23 distinct parts.

Its main chip is the RP2040, from the RP2040/RP2350 family. Other key parts include the NCP1117-3.3_SOT223, TPD1E05U06DYA, W25Q128JVSIQ and TPD4E05U06DQA. By type, the board carries 26 capacitors, 13 resistors, 5 ICs, 5 diodes, 3 connectors and 3 switches.

From the project

osu optimization attempt

Main components on the MRev

NCP1117-3.3_SOT223TPD1E05U06DYARP2040W25Q128JVSIQTPD4E05U06DQA

MRev bill of materials (BOM)

60 components, 23 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
NCP1117-3.3_SOT223
U1
1
TPD1E05U06DYA
U2
1
RP2040
U3
1
W25Q128JVSIQ
U4
1
TPD4E05U06DQA
U5
1
ABM8-272-T3
X2
1
USB_C_Receptacle_USB2.0_16P
J1
1
Conn_01x04_Pin
J2
1
Conn_01x03_Pin
J4
4
~
HS1, HS2, HS3, HS4
2
SW_Push
SW1, SW3
1
RotaryEncoder_Switch_MP
SW2
4
SK6812MINI-E
D2, D3, D5, D6
1
D
D7
3
10uF
C1, C4, C17
2
15pF
C2, C3
19
100nF
C5, C6, C7, C9, C11, C12, C13, C14 +11
2
1uF
C8, C10
2
1k
R1, R9
6
10k
R2, R5, R6, R7, R10, R14
Show 3 more
QtyPartRefs
2
27
R3, R4
1
500
R8
2
5.1k
R11, R12

MRev design files

The KiCad project lives in the MrFriedOk/flickerflame repository on GitHub; these links point at the commit this page was built from.

MRev: common questions

What microcontroller does the MRev use?

The MRev is built around the RP2040, from the RP2040/RP2350 family.

How big is the MRev PCB?

The MRev measures 60 × 50 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the MRev?

60 components, from 23 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the MRev design files?

From the MrFriedOk/flickerflame repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the MRev design in my own project?

The repository has no license, so all rights stay with MrFriedOk. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the MRev without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.

More boards in flickerflame

Similar boards