9 open source boards using the NC7WZ07P6X
Real designs built with the NC7WZ07P6X, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
ESP32
FreeDSP-aurora
freeDSP
110 × 110 mm502 parts2LCC-BY-SA-4.0222FreeDSP-INFINITAS
freeDSP
240 × 70 mm204 parts2LNo license35STM32
NoNameComputer-2.0
PlanAndBuild
40 × 100 mm107 parts4LNo license2ESP32
FreeDSP-aurora
mischuja
110 × 110 mm502 parts2LGPL-3.01FPGA
FPGA-Board
AbdulAjadi1
132.6 × 97.9 mm569 parts8LNo license0AVR/Arduino
Raspberry Pi Compute Module 5 Drone Carrier
AMLing2
56.2 × 70.5 mm121 parts4LMIT0RP2040/RP2350
4in gps
sonicavionics
84.1 × 61.7 mm84 parts4LMIT0ESP32
Adau1492
fabguitar69690
113 × 77 mm171 parts2LNo license0Neo tracker hat
MTalon63
40 × 40 mm14 parts4LCustom license2
How designs wire the NC7WZ07P6X
Read from the KiCad layouts of 9 open source designs, one per repository: what each pin of the NC7WZ07P6X connects to, and the resistors, capacitors and other passives placed on it.
- The VCC pin has a decoupling capacitor on 6 of 9 designs, most often 100 nF.
- The Y1 pin has a pull-up to VDD on 6 of 9 designs, most often 2.2 kΩ (then 10 kΩ).
- The Y2 pin has a pull-up to VDD on 5 of 9 designs, most often 10 kΩ.
- The A1 pin has a pull-up to VDD on 4 of 9 designs.
| Pin | Connected to | Parts on the pin |
|---|---|---|
| A1pin 1 | Connected to: ADAU1452WBCPZ 44%, ADM811TARTZ-REEL 44%, AK4458VN 22% |
|
| GNDpin 2 | Connected to: GND 89% | — |
| A2pin 3 | Connected to: Signal 67% · not connected 22% |
|
| Y2pin 4 | Connected to: XE216-512-TQ128-C20 33% · not connected 33% |
|
| VCCpin 5 | Connected to: VDD 89% |
|
| Y1pin 6 | Connected to: XE216-512-TQ128-C20 33% |
|
Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include FreeDSP-aurora by freeDSP, FreeDSP-INFINITAS by freeDSP, Neo tracker hat by MTalon63 and NoNameComputer-2.0 by PlanAndBuild.
The NC7WZ07P6X in open source designs
The gallery holds 9 open source boards using the NC7WZ07P6X from 9 GitHub repositories; a typical one measures about 110 × 77 mm and carries around 171 components.
56% use four copper layers or more, and 44% carry an open source license.
The most starred is FreeDSP-aurora by freeDSP.
Parts used alongside the NC7WZ07P6X
Microcontrollers on boards using the NC7WZ07P6X
What boards using the NC7WZ07P6X are built for
NC7WZ07P6X: common questions
Where can I find a NC7WZ07P6X reference design?
Each of the 9 boards on this page is a real design using the NC7WZ07P6X. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the NC7WZ07P6X VCC pin?
The VCC pin has a decoupling capacitor on 6 of 9 designs, most often 100 nF. Counted from the KiCad layouts of 9 open source designs using the NC7WZ07P6X.
What pull-up resistor is used on the NC7WZ07P6X Y1 pin?
The Y1 pin has a pull-up to VDD on 6 of 9 designs, most often 2.2 kΩ (then 10 kΩ). Counted from the KiCad layouts of 9 open source designs using the NC7WZ07P6X.
What pull-up resistor is used on the NC7WZ07P6X Y2 pin?
The Y2 pin has a pull-up to VDD on 5 of 9 designs, most often 10 kΩ. Counted from the KiCad layouts of 9 open source designs using the NC7WZ07P6X.
What parts are used alongside the NC7WZ07P6X?
The 25AA1024T-I/SM, ADAU1452WBCPZ, ADM811TARTZ-REEL, LM1117MP-5.0/NOPB and CS2100CP-CZZ appear in the most repositories here.
Which microcontrollers do boards using the NC7WZ07P6X use?
Most are built on ESP32 (3), AVR/Arduino (1), FPGA (1) and RP2040/RP2350 (1).
How big is a typical board using the NC7WZ07P6X?
The median is 110 × 77 mm, and 44% are two-layer designs.
What is the most popular open source board using the NC7WZ07P6X?
By GitHub stars, FreeDSP-aurora by freeDSP, with 222 stars.
Can I simulate one of these boards using the NC7WZ07P6X before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.