5 open source boards using the TPS62160DSG

Real designs built with the TPS62160DSG, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

5 boardsClear filters|Most starred

How designs wire the TPS62160DSG

Read from the KiCad layouts of 5 open source designs, one per repository: what each pin of the TPS62160DSG connects to, and the resistors, capacitors and other passives placed on it.

  • The FB pin has a resistor to GND on 4 of 5 designs, most often 8.2 kΩ (then 130 kΩ).
  • The VOS pin has a capacitor to GND on 4 of 5 designs, most often 22 µF.
  • The VOS pin has a inductor on 4 of 5 designs, most often 2.2 µH.
  • The SW pin has a inductor on 4 of 5 designs, most often 2.2 µH.
PGNDpin 1Connected to: GND 100%
VINpin 2Connected to: VDD 80% · a signal 20%
  • Decoupling capacitor on 60% · 10 µF (3)
ENpin 3Connected to: VDD 60% · a signal 40%
AGNDpin 4Connected to: GND 100%
FBpin 5Connected to: Signal 80% · not connected 20%
  • Resistor to GND on 80% · 8.2 kΩ (1), 130 kΩ (1), 200 kΩ (1)
  • Pull-up to 5V on 40% · 43 kΩ (1), 562 kΩ (1)
  • Series resistor on 40% · 680 kΩ (1), 787 kΩ (1)
VOSpin 6Connected to: Signal 60% · 5V 40%
  • Capacitor to GND on 80% · 22 µF (4)
  • Inductor on 80% · 2.2 µH (4)
  • Series resistor on 40% · 100 kΩ (2), 680 kΩ (1), 787 kΩ (1)
SWpin 7Connected to: Signal 80% · not connected 20%
  • Inductor on 80% · 2.2 µH (4)
PGpin 8Connected to: Signal 60% · not connected 20% · GND 20%
  • Series resistor on 40% · 100 kΩ (2)
PADpin 9Connected to: GND 100%

Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include ILDAWaveX16 by stanleyondrus, RocketPCB by scottzach1, Pcb buck test by TimGoll and Ecardz-Controller by mte-capstone-ecards.

The TPS62160DSG in open source designs

The gallery holds 5 open source boards using the TPS62160DSG from 5 GitHub repositories; a typical one measures about 121.9 × 70.3 mm and carries around 42 components.

60% use four copper layers or more, and 60% carry an open source license.

The most starred is ILDAWaveX16 by stanleyondrus.

Parts used alongside the TPS62160DSG

Microcontrollers on boards using the TPS62160DSG

What boards using the TPS62160DSG are built for

TPS62160DSG: common questions

Where can I find a TPS62160DSG reference design?

Each of the 5 boards on this page is a real design using the TPS62160DSG. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What resistor goes on the TPS62160DSG FB pin?

The FB pin has a resistor to GND on 4 of 5 designs, most often 8.2 kΩ (then 130 kΩ). Counted from the KiCad layouts of 5 open source designs using the TPS62160DSG.

How is the TPS62160DSG VOS pin connected?

The VOS pin has a capacitor to GND on 4 of 5 designs, most often 22 µF. Counted from the KiCad layouts of 5 open source designs using the TPS62160DSG.

How is the TPS62160DSG SW pin connected?

The SW pin has a inductor on 4 of 5 designs, most often 2.2 µH. Counted from the KiCad layouts of 5 open source designs using the TPS62160DSG.

Which microcontrollers do boards using the TPS62160DSG use?

Most are built on ESP32 (2) and STM32 (2).

How big is a typical board using the TPS62160DSG?

The median is 121.9 × 70.3 mm, and 40% are two-layer designs.

What is the most popular open source board using the TPS62160DSG?

By GitHub stars, ILDAWaveX16 by stanleyondrus, with 43 stars.

Can I simulate one of these boards using the TPS62160DSG before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part