Timemaster2ho
mtnofcode·timemaster2ho
About the Timemaster2ho PCB
Timemaster2ho is an open source PCB design by mtnofcode, published on GitHub under the CC-BY-SA-4.0 license. It is a 4-layer board measuring 119.4 × 76.2 mm, with 17 components from 16 distinct parts.
Other key parts include the MSM5832, 74LS245, HD6821, HM6116P and 74LS00. By type, the board carries 8 ICs, 3 capacitors, 2 diodes, 2 resistors, 1 connector and 1 switch.
From the project
PCB for the TimeMaster II H.O. board from Applied Engineering, Inc.
I recently acquired an Apple IIe with a TimeMaster II H.O. board in it, but the on-board battery (a VARTA) had leaked all over it, rendering the board unsalvageable.
However, because it's a simple 2-layer board, it was fairly straightforward to reverse-engineer it, so I brushed up on my KiCAD and came up with this. The schematic could probably be improved, but my main intent here was just to get something going in order to be able to route the PCB.

Main components on the Timemaster2ho
Timemaster2ho bill of materials (BOM)
17 components, 16 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | MSM5832 | DIP-18_W7.62mm_Socket_LongPads | U1 |
| 1 | 74LS245 | DIP-20_W7.62mm_Socket_LongPads | U2 |
| 1 | HD6821 | DIP-40_W15.24mm_Socket_LongPads | U3 |
| 1 | HM6116P | DIP-24_W15.24mm_Socket_LongPads | U4 |
| 1 | 74LS00 | DIP-14_W7.62mm_Socket_LongPads | U5 |
| 1 | 74LS08 | DIP-14_W7.62mm_Socket_LongPads | U6 |
| 1 | Edge Connector | EDGE_50 | U7 |
| 1 | Battery | Varta Battery | U8 |
| 1 | Conn_01x08 | HDR-4_Pin | J1 |
| 1 | SW_DIP_x04 | DIP-4_Switch | SW1 |
| 2 | 1N4148 | Diode | D1, D2 |
| 1 | C_Variable | Trimmer Cap | C1 |
| 1 | 10J | C_Disc_D10.0mm_W2.5mm_P5.00mm | C2 |
| 1 | 10uF 18V | C_Axial | C3 |
| 1 | 220 Ohm | R_Axial | R1 |
| 1 | 750 Ohm | R_Axial | R2 |
Timemaster2ho design files
The KiCad project lives in the mtnofcode/timemaster2ho repository on GitHub; these links point at the commit this page was built from.
- Layoutaetimemaster.kicad_pcb
- Schematicaetimemaster.kicad_sch
Timemaster2ho: common questions
How big is the Timemaster2ho PCB?
The Timemaster2ho measures 119.4 × 76.2 mm, has 4 copper layers and is 1.600198 mm thick.
How many components are on the Timemaster2ho?
17 components, from 16 distinct parts. The full bill of materials is listed on this page.
Where can I download the Timemaster2ho design files?
From the mtnofcode/timemaster2ho repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Timemaster2ho design in my own project?
Yes, under the terms of its CC-BY-SA-4.0 license, which mtnofcode chose for the repository.