HardLabs

MainBoard

MUNAKATA-EPC·Artemis_2024·Project_KOKUROU_dev.1/Hardware/kicad_data/MainBoard2/MainBoard.kicad_pcb

MainBoard PCB layout, top view — open source NXP board by MUNAKATA-EPC

About the MainBoard PCB

MainBoard is an open source NXP PCB design by MUNAKATA-EPC, published on GitHub. It is a 2-layer board measuring 86.6 × 107.3 mm, with 29 components from 18 distinct parts.

Its main chip is the Teensy4.0, from the NXP family. Other key parts include the SeeeduinoXIAO. By type, the board carries 15 connectors, 4 resistors, 3 ICs, 2 switches, 2 capacitors and 1 buzzer.

From the project

OpenLeague→LightWeightと方針を転換しました。 OpenLeagueの残骸に関しては2025シーズンに向けての開発と思ってもらえればよきです。

OpenLeague→LightWeightと方針を転換しました。 OpenLeagueの残骸に関しては2025シーズンに向けての開発と思ってもらえればよきです。

・PlatformIO等で作成されたプロジェクトフォルダの名前は (プロジェクト名)-(開発環境) にしましょう。 ex. hogehoge-teensy40 hugahuga-seeeduinoxiaorp2040

・KiCad、Fusion360などで作成されたフォルダ、ファイルの名前は一目でわかる名前にしましょう。 間違ってもファイル名を"unko"とかにするなよ！！！！！(戒め)

Main components on the MainBoard

Teensy4.0SeeeduinoXIAO

MainBoard bill of materials (BOM)

29 components, 18 distinct parts.

QtyPartRefs
1
Teensy4.0
U1
1
SeeeduinoXIAO
U2
1
~
U3
4
Conn_01x05_Socket
J1, J2, J3, J17
4
Conn_01x02_Socket
J4, J5, J6, J12
1
Conn_01x04_Socket
J7
2
Conn_01x03_Socket
J8, J14
1
Conn_01x04_Socket
J9
1
Conn_01x10_Socket
J10
1
Conn_01x02_Socket
J11
1
Conn_01x08_Socket
J13
1
Buzzer
BZ1
1
R_Potentiometer_Trim_US
RV1
2
SW_Push
SW1, SW2
1
D
D1
2
C
C1, C2
2
R
R2, R3
2
R_Trim
R4, R5

MainBoard design files

The KiCad project lives in the MUNAKATA-EPC/Artemis_2024 repository on GitHub; these links point at the commit this page was built from.

MainBoard: common questions

What microcontroller does the MainBoard use?

The MainBoard is built around the Teensy4.0, from the NXP family.

How big is the MainBoard PCB?

The MainBoard measures 86.6 × 107.3 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the MainBoard?

29 components, from 18 distinct parts. The full bill of materials is listed on this page.

Where can I download the MainBoard design files?

From the MUNAKATA-EPC/Artemis_2024 repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the MainBoard design in my own project?

The repository has no license, so all rights stay with MUNAKATA-EPC. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the MainBoard without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug NXP firmware against it before you order a PCB.

More boards in Artemis_2024

Similar boards