HardLabs

Main board

MUNAKATA-EPC·Artemis_2024·Project_DefencerByAsahi/Hardware/kicad_data/main_board/main_board.kicad_pcb

Main board layout, top view — open source NXP board by MUNAKATA-EPC

About the Main board

Main board is an open source NXP PCB design by MUNAKATA-EPC, published on GitHub. It is a 2-layer board measuring 120 × 120 mm, with 48 components from 18 distinct parts.

Its main chip is the Teensy4.0, from the NXP family. Other key parts include the open_mv, SeeeduinoXIAO, L3GD20H_module and TSSP58038. By type, the board carries 12 ICs, 8 capacitors, 6 connectors, 5 switches, 5 resistors and 2 diodes.

From the project

OpenLeague→LightWeightと方針を転換しました。 OpenLeagueの残骸に関しては2025シーズンに向けての開発と思ってもらえればよきです。

OpenLeague→LightWeightと方針を転換しました。 OpenLeagueの残骸に関しては2025シーズンに向けての開発と思ってもらえればよきです。

・PlatformIO等で作成されたプロジェクトフォルダの名前は (プロジェクト名)-(開発環境) にしましょう。 ex. hogehoge-teensy40 hugahuga-seeeduinoxiaorp2040

・KiCad、Fusion360などで作成されたフォルダ、ファイルの名前は一目でわかる名前にしましょう。 間違ってもファイル名を"unko"とかにするなよ！！！！！(戒め)

Main components on the Main board

Teensy4.0open_mvSeeeduinoXIAOL3GD20H_moduleTSSP58038

Main board bill of materials (BOM)

48 components, 18 distinct parts.

QtyPartRefs
1
Teensy4.0
U1
1
open_mv
U2
1
SeeeduinoXIAO
U3
1
L3GD20H_module
U4
8
TSSP58038
U5, U6, U7, U8, U9, U10, U11, U12
2
Conn_01x03_Female
J1, J5
1
Conn_01x04_Female
J2
2
Conn_01x02_Female
J3, J6
1
Conn_01x05_Female
J4
8
R
100k1, 100k2, 100k3, 100k4, 100k5, 100k6, 100k7, 100k8
1
R_Potentiometer_Trim_US
RV1
5
SW_Push
SW1, SW2, SW3, SW4, SW5
1
SSD1306
Brd1
2
D
D1, D2
8
C_Small
C1, C2, C3, C4, C5, C6, C7, C8
2
10k
R1, R2
2
R
R3, R4
1
R_Trim
R5

Main board design files

The KiCad project lives in the MUNAKATA-EPC/Artemis_2024 repository on GitHub; these links point at the commit this page was built from.

Main board: common questions

What microcontroller does the Main board use?

The Main board is built around the Teensy4.0, from the NXP family.

How big is the Main board?

The Main board measures 120 × 120 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Main board?

48 components, from 18 distinct parts. The full bill of materials is listed on this page.

Where can I download the Main board design files?

From the MUNAKATA-EPC/Artemis_2024 repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Main board design in my own project?

The repository has no license, so all rights stay with MUNAKATA-EPC. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Main board without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug NXP firmware against it before you order a PCB.

More boards in Artemis_2024

Similar boards