Sensors board
About the Sensors board
Sensors board is an open source PCB design by MUNAKATA-EPC, published on GitHub. It is a 2-layer board measuring 119.9 × 122.9 mm, with 34 components from 9 distinct parts.
Other key parts include the TSSP58038, SeeeduinoXIAO and open_mv. By type, the board carries 10 ICs, 10 resistors, 8 capacitors, 4 switches, 1 connector and 1 LED.
It belongs with the sensors designs in this gallery.
From the project
OpenLeague→LightWeightと方針を転換しました。 OpenLeagueの残骸に関しては2025シーズンに向けての開発と思ってもらえればよきです。
OpenLeague→LightWeightと方針を転換しました。 OpenLeagueの残骸に関しては2025シーズンに向けての開発と思ってもらえればよきです。
・PlatformIO等で作成されたプロジェクトフォルダの名前は (プロジェクト名)-(開発環境) にしましょう。 ex. hogehoge-teensy40 hugahuga-seeeduinoxiaorp2040
・KiCad、Fusion360などで作成されたフォルダ、ファイルの名前は一目でわかる名前にしましょう。 間違ってもファイル名を"unko"とかにするなよ！！！！！(戒め)
Main components on the Sensors board
Sensors board bill of materials (BOM)
34 components, 9 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 8 | TSSP58038 | TSSP58038 | U1, U2, U3, U4, U5, U6, U7, U8 |
| 1 | SeeeduinoXIAO | seeeduinoXIAO | U9 |
| 1 | open_mv | OpenMV | U10 |
| 1 | Conn_01x14_Female | IDC-Header_2x07_P2.54mm_Horizontal | J1 |
| 4 | SW_Push | SW_PUSH_6mm_H5mm | SW1, SW2, SW3, SW5 |
| 1 | SSD1306 | 128x64OLED | Brd1 |
| 8 | C_Small | C_Disc_D3.0mm_W2.0mm_P2.50mm | C1, C2, C3, C4, C5, C6, C7, C8 |
| 8 | 100k | R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Horizontal | R1, R2, R3, R4, R5, R6, R7, R8 |
| 2 | 10k | R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Horizontal | R9, R10 |
Sensors board design files
The KiCad project lives in the MUNAKATA-EPC/Artemis_2024 repository on GitHub; these links point at the commit this page was built from.
Sensors board: common questions
How big is the Sensors board?
The Sensors board measures 119.9 × 122.9 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Sensors board?
34 components, from 9 distinct parts. The full bill of materials is listed on this page.
Where can I download the Sensors board design files?
From the MUNAKATA-EPC/Artemis_2024 repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Sensors board design in my own project?
The repository has no license, so all rights stay with MUNAKATA-EPC. Use it as a reference, and ask the author before reusing the design.
More boards in Artemis_2024
Center Line
119.8 × 119.8 mm134 parts2LNo license0
Engel line board v2
209.9 × 170 mm99 parts2LNo license0
SensorBoard
100 × 100 mm91 parts2LNo license0
Line all borard
196 × 162.9 mm70 parts2LNo license0
Sensor
100 × 100 mm59 parts2LNo license0
RP2040/RP2350Drive
62.9 × 77.9 mm55 parts2LNo license0
Line board
98 × 97.9 mm51 parts2LNo license0
Line sensor
110 × 110 mm49 parts2LNo license0
NXPMain board
120 × 120 mm48 parts2LNo license0
NXPMainBoard
86.6 × 107.3 mm29 parts2LNo license0
LineIntegratedBoard
31.7 × 28 mm6 parts2LNo license0
Similar boards
Sensor smd
scottbez1
40 × 20 mm5 parts2LApache-2.04.2k
Sensors
StuckAtPrototype
15.2 × 9 mm14 parts4LApache-2.03.8k
Microphone
Mentra-Community
5.5 × 6.1 mm6 parts2LMIT1.2k
TemperaturePCB PANEL
stuartpittaway
116 × 75.5 mm178 parts2LCC-BY-NC-4.01.1k
Pots
shanteacontrols
390 × 93 mm75 parts2LApache-2.0956
ButtonsLEDs
390 × 37 mm82 parts2LApache-2.0956