HardLabs

CAM

MUNAKATA-EPC·Artemis_2025·Project_Tsukuyomi (JapanOpen)/Hardware/KiCad/CAM/CAM.kicad_pcb

CAM PCB layout, top view — open source NXP board by MUNAKATA-EPC

About the CAM PCB

CAM is an open source NXP PCB design by MUNAKATA-EPC, published on GitHub. It is a 2-layer board measuring 85 × 78.7 mm, with 29 components from 9 distinct parts.

Its main chip is the Teensy4.0, from the NXP family. Other key parts include the TSSP58P38 and AZ1084-5.0. By type, the board carries 8 ICs, 8 capacitors, 7 connectors and 6 resistors.

From the project

Munako Artemis 2025シーズンのリポジトリ

・PlatformIO等で作成されたプロジェクトフォルダの名前は (プロジェクト名)-(開発環境) にしましょう。 ex. hogehoge-teensy40 hugahuga-seeeduinoxiaorp2040

・KiCad、Fusion360などで作成されたフォルダ、ファイルの名前は一目でわかる名前にしましょう。

Main components on the CAM

TSSP58P38AZ1084-5.0Teensy4.0

CAM bill of materials (BOM)

29 components, 9 distinct parts.

QtyPartRefs
6
TSSP58P38
U1, U2, U3, U4, U5, U6
1
AZ1084-5.0
U7
1
Teensy4.0
U8
6
Conn_01x04_Socket
J1, J2, J3, J4, J5, J6
1
Conn_01x04_Socket
J7
6
C_Small
C1, C2, C3, C4, C5, C6
1
C
C7
1
C
C8
6
R
R1, R2, R3, R4, R5, R6

CAM design files

The KiCad project lives in the MUNAKATA-EPC/Artemis_2025 repository on GitHub; these links point at the commit this page was built from.

CAM: common questions

What microcontroller does the CAM use?

The CAM is built around the Teensy4.0, from the NXP family.

How big is the CAM PCB?

The CAM measures 85 × 78.7 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the CAM?

29 components, from 9 distinct parts. The full bill of materials is listed on this page.

Where can I download the CAM design files?

From the MUNAKATA-EPC/Artemis_2025 repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the CAM design in my own project?

The repository has no license, so all rights stay with MUNAKATA-EPC. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the CAM without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug NXP firmware against it before you order a PCB.

More boards in Artemis_2025

Similar boards