7 open source boards using the TSSP58P38

Real designs built with the TSSP58P38, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

7 boardsClear filters|Most starred

The TSSP58P38 in open source designs

The gallery holds 7 open source boards using the TSSP58P38 from 4 GitHub repositories; a typical one measures about 74.9 × 77.3 mm and carries around 35 components.

100% are two-layer designs, the rest use four layers or more, and 43% carry an open source license.

The most starred is Sympetrum V2 by borgel.

Microcontrollers on boards using the TSSP58P38

What boards using the TSSP58P38 are built for

TSSP58P38: common questions

Where can I find a TSSP58P38 reference design?

Each of the 7 boards on this page is a real design using the TSSP58P38. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

Which microcontrollers do boards using the TSSP58P38 use?

Most are built on STM32 (3), AVR/Arduino (1) and NXP (1).

How big is a typical board using the TSSP58P38?

The median is 74.9 × 77.3 mm, and 100% are two-layer designs.

What is the most popular open source board using the TSSP58P38?

By GitHub stars, Sympetrum V2 by borgel, with 28 stars.

Can I simulate one of these boards using the TSSP58P38 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part