STM32F405RGT6-Breakout
MURPHYENGINEERING·STM32F405RGT6-Breakout·kicad/STM32F405RGT6-Breakout.kicad_pcb
About the STM32F405RGT6-Breakout
STM32F405RGT6-Breakout is an open source STM32 PCB design by MURPHYENGINEERING, published on GitHub. It is a 4-layer board measuring 100.2 × 101.1 mm, with 58 components from 36 distinct parts.
Its main chip is the STM32F405RGT6, from the STM32 family. Other key parts include the AMS1117-3.3, USBLC6-2SC6 and W25Q128JVS. By type, the board carries 20 capacitors, 13 resistors, 11 connectors, 4 ICs, 3 diodes and 2 switches.
It belongs with the wearables and dev boards & breakouts designs in this gallery.
From the project
Following along with Phil's Lab: https://www.youtube.com/watch?v=t5phi3nT8OU
Also check out his very cool fixed wing and multirotor projects.
Please consider supporting his work by becoming a patron.
Main components on the STM32F405RGT6-Breakout
STM32F405RGT6-Breakout bill of materials (BOM)
58 components, 36 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | STM32F405RGT6 | LQFP-64_10x10mm_P0.5mm | U1 |
| 1 | AMS1117-3.3 | SOT-223-3_TabPin2 | U2 |
| 1 | USBLC6-2SC6 | SOT-23-6 | U3 |
| 1 | W25Q128JVS | SOIC-8_5.23x5.23mm_P1.27mm | U4 |
| 1 | Si2301CDS | SOT-23 | Q1 |
| 1 | USB_C_Receptacle_USB2.0 | USB_C_Receptacle_XKB_U262-16XN-4BVC11 | J1 |
| 1 | PWR OUT | PinSocket_1x02_P2.54mm_Vertical_SMD_Pin1Left | J2 |
| 1 | SWD/JTAG | PinSocket_2x05_P1.27mm_Vertical_SMD | J3 |
| 1 | USART6 | PinSocket_1x04_P2.54mm_Vertical_SMD_Pin1Left | J4 |
| 1 | SPI1 | PinSocket_1x04_P2.54mm_Vertical_SMD_Pin1Left | J5 |
| 1 | I2C1 | PinSocket_1x04_P2.54mm_Vertical_SMD_Pin1Left | J6 |
| 1 | I2C2 | PinSocket_1x04_P2.54mm_Vertical_SMD_Pin1Left | J7 |
| 3 | Conn_01x04 | PinSocket_1x04_P2.54mm_Vertical_SMD_Pin1Left | J8, J9, J10 |
| 1 | Conn_01x03 | PinSocket_1x03_P2.54mm_Vertical_SMD_Pin1Left | J11 |
| 1 | 500mA | Fuse_0603_1608Metric | F1 |
| 1 | 16MHz | Crystal_SMD_3225-4Pin_3.2x2.5mm | HSE1 |
| 2 | TS-1187A-B-A-B | SW_TS-1187A-B-A-B | SW1, SW2 |
| 1 | ZMM5V6 | D_MiniMELF | D1 |
| 2 | Red | D_0603_1608Metric | D2, D3 |
| 2 | 100 @ 100 MHz | L_0805_2012Metric | FB1, FB2 |
Show 16 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 8 | 100u | C_0402_1005Metric | C1, C2, C3, C4, C5, C6, C7, C8 |
| 1 | 10u | C_0603_1608Metric | C9 |
| 2 | 2.2u | C_0603_1608Metric | C10, C11 |
| 2 | 12p | C_0402_1005Metric | C12, C13 |
| 2 | 100n | C_0402_1005Metric | C14, C18 |
| 1 | 10n | C_0402_1005Metric | C15 |
| 2 | 10u | C_0805_2012Metric | C16, C17 |
| 1 | 100n | C_0603_1608Metric | C19 |
| 1 | 4.7u | C_0805_2012Metric | C20 |
| 1 | 100 | R_0805_2012Metric | R1 |
| 2 | 10k | R_0603_1608Metric | R2, R9 |
| 4 | 2.2k | R_0402_1005Metric | R3, R4, R5, R6 |
| 1 | 22k | R_0603_1608Metric | R7 |
| 3 | 10k | R_0402_1005Metric | R8, R13, R17 |
| 1 | 220 | R_0402_1005Metric | R10 |
| 1 | 5.1k | R_0402_1005Metric | R11 |
STM32F405RGT6-Breakout design files
The KiCad project lives in the MURPHYENGINEERING/STM32F405RGT6-Breakout repository on GitHub; these links point at the commit this page was built from.
STM32F405RGT6-Breakout: common questions
What microcontroller does the STM32F405RGT6-Breakout use?
The STM32F405RGT6-Breakout is built around the STM32F405RGT6, from the STM32 family.
How big is the STM32F405RGT6-Breakout?
The STM32F405RGT6-Breakout measures 100.2 × 101.1 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the STM32F405RGT6-Breakout?
58 components, from 36 distinct parts. The full bill of materials is listed on this page.
Where can I download the STM32F405RGT6-Breakout design files?
From the MURPHYENGINEERING/STM32F405RGT6-Breakout repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the STM32F405RGT6-Breakout design in my own project?
The repository has no license, so all rights stay with MURPHYENGINEERING. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the STM32F405RGT6-Breakout without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
Similar boards
STM32
LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7kSTM32
Type g
google
169 × 30 mm24 parts2LApache-2.02.9kSTM32
Type a
google
150 × 30 mm14 parts2LApache-2.02.9kSTM32
Base
google
52.3 × 52.3 mm36 parts2LApache-2.02.9kSTM32
Main panel
google
234 × 84 mm26 parts4LApache-2.02.9kSTM32
Type c
google
188 × 30 mm17 parts2LApache-2.02.9k