MidiKeyboard
musicalruh-glitch·MidiKeyboard
About the MidiKeyboard PCB
MidiKeyboard is an open source ESP32 PCB design by musicalruh-glitch, published on GitHub. It is a 2-layer board measuring 93 × 89 mm, with 10 components from 6 distinct parts.
Its main chip is the Waveshare ESP32-S3-ZERO, from the ESP32 family. By type, the board carries 4 switches, 3 diodes, 1 IC and 1 connector.
It belongs with the keyboards and audio designs in this gallery.
From the project
Storing Code files for my Midi Keyboard :D
This is my MIDI Keyboard, as per the guide from Halflife! The file called "Production" has everything necessary for JLCPCB production. As for the rest of the files, the one that end in pcb is my PCB, sch is my schematic, and _pro is the whole project.
I'm extremely sorry for the reviewers, my sister took my computer and posted a kindness reel for my closing reel, and she messed up a lot of stuff and I had to hassle with her a lot, so there wasn't a lot of time to submit properly.
Main components on the MidiKeyboard
MidiKeyboard bill of materials (BOM)
10 components, 6 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | Waveshare ESP32-S3-ZERO | Waveshare ESP32-S3-Zero | U1 |
| 1 | Capacitive Touch Buttons | CapacitiveKeys | J1 |
| 1 | Slider | Potentiometer_Bourns_PTA1543_Single_Slide | RV1 |
| 3 | SW_Push | Kailh Choc Low-Profile Switches | SW1, SW2, SW3 |
| 1 | RotaryEncoder_Switch_MP | RotaryEncoder_Alps_EC12E-Switch_Vertical_H20mm | SW5 |
| 3 | SK6812MINI-E | LED_SK6812MINI-E_3.2x2.8mm_P1.5mm_ReverseMount | D1, D2, D3 |
MidiKeyboard design files
The KiCad project lives in the musicalruh-glitch/MidiKeyboard repository on GitHub; these links point at the commit this page was built from.
- Layoutmidi-keypad.kicad_pcb
- Schematicmidi-keypad.kicad_sch
- BOMBOM.csv
MidiKeyboard: common questions
What microcontroller does the MidiKeyboard use?
The MidiKeyboard is built around the Waveshare ESP32-S3-ZERO, from the ESP32 family.
How big is the MidiKeyboard PCB?
The MidiKeyboard measures 93 × 89 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the MidiKeyboard?
10 components, from 6 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the MidiKeyboard design files?
From the musicalruh-glitch/MidiKeyboard repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the MidiKeyboard design in my own project?
The repository has no license, so all rights stay with musicalruh-glitch. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the MidiKeyboard without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k