AutoSense--Smart-Asset-Monitoring-Maintenance
Muzammillcoste·AutoSense--Smart-Asset-Monitoring-Maintenance·IoT/PCB/AUTO SENSE.kicad_pcb
About the AutoSense--Smart-Asset-Monitoring-Maintenance PCB
AutoSense--Smart-Asset-Monitoring-Maintenance is an open source ESP32 PCB design by Muzammillcoste, published on GitHub. It is a 2-layer board measuring 99.5 × 99.4 mm, with 11 components from 9 distinct parts.
Its main chip is the ESP32-S3-DEVKITC-1-N8R2, from the ESP32 family. By type, the board carries 9 connectors, 1 IC and 1 resistor.
It belongs with the iot & wireless and sensors designs in this gallery.
From the project
AutoSense is a prototype vehicle-monitoring system built as an undergraduate final-year project at NED University of Engineering & Technology, Karachi. The project report calls it Smart Asset Tracking and Predictive Maintenance System for Flight Catering. It connects a custom ESP
AutoSense is a prototype vehicle-monitoring system built as an undergraduate final-year project at NED University of Engineering & Technology, Karachi. The project report calls it Smart Asset Tracking and Predictive Maintenance System for Flight Catering. It connects a custom ESP32-S3 sensor unit, a cloud monitoring dashboard, 24-hour sensor-reading forecasts, and Salesforce alert records into a single maintenance workflow.

Main components on the AutoSense--Smart-Asset-Monitoring-Maintenance
AutoSense--Smart-Asset-Monitoring-Maintenance bill of materials (BOM)
11 components, 9 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ESP32-S3-DEVKITC-1-N8R2 | XCVR_ESP32-S3-DEVKITC-1-N8R2 | U1 |
| 1 | NEO 6M GPS | PinSocket_1x04_P2.54mm_Vertical | J1 |
| 1 | DS18B20 | TerminalBlock_Phoenix_MKDS-1,5-3-5.08_1x03_P5.08mm_Horizontal | J2 |
| 1 | FUEL SEN | TerminalBlock_Phoenix_MKDS-1,5-2-5.08_1x02_P5.08mm_Horizontal | J3 |
| 1 | MCP2515 MODULE | PinSocket_1x07_P2.54mm_Horizontal | J4 |
| 3 | CONN_01X08_PIN Conn_01x08_Pin | TerminalBlock_Phoenix_MKDS-1,5-8-5.08_1x08_P5.08mm_Horizontal | J5, J6, J7 |
| 1 | CONN | TerminalBlock_Phoenix_MKDS-1,5-4-5.08_1x04_P5.08mm_Horizontal | J8 |
| 1 | POWER | TerminalBlock_Phoenix_MKDS-1,5-2-5.08_1x02_P5.08mm_Horizontal | J9 |
| 1 | 100R | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1 |
AutoSense--Smart-Asset-Monitoring-Maintenance design files
The KiCad project lives in the Muzammillcoste/AutoSense--Smart-Asset-Monitoring-Maintenance repository on GitHub; these links point at the commit this page was built from.
AutoSense--Smart-Asset-Monitoring-Maintenance: common questions
What microcontroller does the AutoSense--Smart-Asset-Monitoring-Maintenance use?
The AutoSense--Smart-Asset-Monitoring-Maintenance is built around the ESP32-S3-DEVKITC-1-N8R2, from the ESP32 family.
How big is the AutoSense--Smart-Asset-Monitoring-Maintenance PCB?
The AutoSense--Smart-Asset-Monitoring-Maintenance measures 99.5 × 99.4 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the AutoSense--Smart-Asset-Monitoring-Maintenance?
11 components, from 9 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the AutoSense--Smart-Asset-Monitoring-Maintenance design files?
From the Muzammillcoste/AutoSense--Smart-Asset-Monitoring-Maintenance repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the AutoSense--Smart-Asset-Monitoring-Maintenance design in my own project?
The repository has no license, so all rights stay with Muzammillcoste. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the AutoSense--Smart-Asset-Monitoring-Maintenance without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8k