Lsw5-esp32-test jig
About the Lsw5-esp32-test jig PCB
Lsw5-esp32-test jig is an open source PCB design by mwdmwd, published on GitHub. It is a 2-layer board measuring 53.8 × 100 mm, with 21 components from 18 distinct parts.
Other key parts include the LD1117V33 and MCP2221AxSL. By type, the board carries 5 connectors, 5 capacitors, 5 resistors, 2 ICs, 2 switches and 2 diodes.
It belongs with the iot & wireless and power & battery designs in this gallery.
From the project
ESP32-based replacement PCB for the Deye/Sofar/Igen/Solarman/... LSW-5 Stick Logger with RS-485
If you need this, you will know how to use it.
Main components on the Lsw5-esp32-test jig
Lsw5-esp32-test jig bill of materials (BOM)
21 components, 18 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | LD1117V33 | TO-220-3_Vertical | U1 |
| 1 | MCP2221AxSL | SOIC-14_3.9x8.7mm_P1.27mm | U2 |
| 1 | Conn_02x03_Odd_Even | PinSocket_2x03_P2.00mm_Vertical | J1 |
| 1 | Conn_02x05_Odd_Even | PinSocket_2x05_P2.00mm_Vertical | J2 |
| 1 | Conn_02x03_Odd_Even | PinHeader_2x03_P2.54mm_Vertical | J3 |
| 1 | Conn_02x05_Odd_Even | PinHeader_2x05_P2.54mm_Vertical | J4 |
| 1 | USB4105-GF-A | GCT_USB4105-GF-A | J5 |
| 1 | DUT | SW_PUSH_6mm | SW1 |
| 1 | USB | SW_PUSH_6mm | SW2 |
| 1 | RX | LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D1 |
| 1 | TX | LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D2 |
| 1 | 22μ | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1 |
| 2 | 100n | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C2, C5 |
| 1 | 1μ | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C3 |
| 1 | 470n | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C4 |
| 2 | 5k1 | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1, R2 |
| 2 | 470 | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R3, R4 |
| 1 | 10k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R5 |
Lsw5-esp32-test jig design files
The KiCad project lives in the mwdmwd/lsw5-esp32 repository on GitHub; these links point at the commit this page was built from.
Lsw5-esp32-test jig: common questions
How big is the Lsw5-esp32-test jig PCB?
The Lsw5-esp32-test jig measures 53.8 × 100 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Lsw5-esp32-test jig?
21 components, from 18 distinct parts. The full bill of materials is listed on this page.
Where can I download the Lsw5-esp32-test jig design files?
From the mwdmwd/lsw5-esp32 repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Lsw5-esp32-test jig design in my own project?
The repository has no license, so all rights stay with mwdmwd. Use it as a reference, and ask the author before reusing the design.
More boards in lsw5-esp32
Similar boards
Stack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7k
Display Carrier
AxxAxx
35.6 × 58.2 mm5 parts2LGPL-3.01.7k
ControllerCurrentShuntAddOn
stuartpittaway
26 × 16.9 mm9 parts2LCC-BY-NC-4.01.1k
Module 16S PassiveBalanceAddOn
61 × 74 mm86 parts2LCC-BY-NC-4.01.1k
TemperaturePCB PANEL
116 × 75.5 mm178 parts2LCC-BY-NC-4.01.1k
ProgrammingAdapter
10.5 × 83 mm3 parts2LCC-BY-NC-4.01.1k