HardLabs

Biltong board control deck

myles-parfeniuk·biltong_board·hardware/biltong_board_control_deck/biltong_board_control_deck.kicad_pcb

Biltong board control deck layout, top view — open source board by myles-parfeniuk
Simulate this board

About the Biltong board control deck

Biltong board control deck is an open source PCB design by myles-parfeniuk, published on GitHub under the GPL-3.0 license. It is a 2-layer board measuring 100 × 70 mm, with 22 components from 15 distinct parts.

By type, the board carries 7 resistors, 6 capacitors, 3 switches, 2 connectors, 2 diodes and 1 transistor.

It belongs with the sensors and power & battery designs in this gallery.

From the project

Sun drying emulation controller for biltong and other dried foodstuffs.

- About - PCBWay Sponsorship - Hardware - System Block Diagram - PCB Renders - Layout - Schematics - Firmware - License - Contact

This was my second time using PCBWay's service, and just like last time the boards came out perfect with no defects. While assembling the boards at home with a friend, I even had him comment the silk screen and cosmetic qualities of the board were superior to that of domestic fabrication houses he has seen used throughout his professional career. To be clear, we are talking about a 0.8mm character height, with no smudging or defected labels on any part of the…

Biltong board control deck, from the project README
From the project README

Biltong board control deck bill of materials (BOM)

22 components, 15 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
MMBT3904
Q1
1
SH1122_DISP
PinHeader_1x07_P2.54mm_Vertical
J1
1
JST_PH_B11B-PH-K_1X11
JST_PH_B11B-PH-K_1x11
J2
1
GT-111P
BZ1
3
TS14-1212-150-BK-260-SCR-D
SW1, SW2, SW3
1
SD101AWS-TP
D1
1
150060VS7500
D2
1
DNP
C1
1
10U
10u
C2
3
10N
10n
C3, C4, C5
1
1u
C6
2
4.7K
R1, R7
1
56
R2
1
DNP
R3
3
10K
10k
R4, R5, R6

Biltong board control deck design files

The KiCad project lives in the myles-parfeniuk/biltong_board repository on GitHub; these links point at the commit this page was built from.

Biltong board control deck: common questions

How big is the Biltong board control deck?

The Biltong board control deck measures 100 × 70 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Biltong board control deck?

22 components, from 15 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Biltong board control deck design files?

From the myles-parfeniuk/biltong_board repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Biltong board control deck design in my own project?

Yes, under the terms of its GPL-3.0 license, which myles-parfeniuk chose for the repository.

More boards in biltong_board

Similar boards