Zipper v.2
myriadrf·reference-development-kit·zipper/hardware/v2/KiCAD/Zipper.kicad_pcb
About the Zipper v.2 PCB
Zipper v.2 is an open source AVR/Arduino PCB design by myriadrf, published on GitHub. It is a 6-layer board measuring 107 × 78 mm, with 172 components from 65 distinct parts.
Its main chip is the AT90USB162-16MU, from the AVR/Arduino family. Other key parts include the SN74LVC1G04DBVR, CDCV304PW, SI5351C-B-GM, SC4524CSETRT and ZLDO1117G33TA. By type, the board carries 91 resistors, 41 capacitors, 16 ICs, 8 connectors, 6 diodes and 3 crystals.
It belongs with the rf & radio and dev boards & breakouts designs in this gallery.
From the project
The Myriad-RF Reference Hardware design files and firmware
This repository contains the Myriad-RF reference hardware designs for Lime Microsystem's LMS6002D and LMS7002M transceivers, plus LMS8001 up/down converter, in PDF and KiCad formats, along with the associated firmware.
The directory structure for the hardware designs is as follows:
The Myriad-RF Radio Frequency Digital Input Output (RFDIO) connector specification defines the electrical and mechanical properties of a high speed card interface for Field Programmable Gate Array (FPGA) based carrier boards. This specification ensures interoperability between carrier (mother) boards and add-on…
Main components on the Zipper v.2
Zipper v.2 bill of materials (BOM)
172 components, 65 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 4 | SN74LVC1G04DBVR Texas Instruments | SOT23-5 | U1, U4, U5, U12 |
| 1 | CDCV304PW Texas Instruments | TSSOP-8 | U2 |
| 1 | SI5351C-B-GM SI5351C Silicon Laboratories Inc | QFN20 | U3 |
| 1 | SC4524CSETRT SC4524 Semtech | SOIC-8 | U6 |
| 1 | ZLDO1117G33TA LDO1117 Diodes Inc | SOT223-3L | U7 |
| 1 | 576-4334-1 MIC37122Y_ADJ_SOIC8 Micrel Inc | SOIC-8 | U8 |
| 4 | SN74LVC162244ADGGR SN74LVC162244A Texas Instruments | TSSOP-48 | U9, U10, U13, U14 |
| 1 | ADF4002BCPZ ADF4002 Analog Devices Inc | QFN20 | U11 |
| 1 | AT90USB162-16MU Atmel | QFN32 | U15 |
| 1 | LP5900SD-3.3/NOPB LP5900SD-3.3 Texas Instruments | SC70 | U16 |
| 1 | XT49M-8M 8MHZ VISHAY DALE | HC49_4H_SMX | X1 |
| 1 | E5280LF RACON_TXCO Rakon | SMD_TXCO | X2 |
| 1 | E6245LF RACON_TXCO_PLUTO+ Rakon | SMD_TXCO_Pluto+ | X3 |
| 2 | H11236 FX10B-80S/8-SV Hirose Electric Co Ltd | FX10B_80S_8_SV | J1, J2 |
| 1 | ASP-122952-01 ASP-122952-01_(HSMC) Samtec | HSMC | J3 |
| 1 | ASP-134604-01 FMC | FMC | J4 |
| 1 | M20-9990246 JUMPER2 HARWIN | pinhead2 | J5 |
| 1 | UX60A-MB-5ST MINI-USB-UX60A-MB-5ST HIROSE | SMD_UX60A-MB-5ST | J6 |
| 1 | 95278-101-50LF PINHEADER2X25 FCI | PinHeader2x25SMD | J7 |
| 1 | 5-1814832-1 SMA TE Connectivity | SMA_vert | J8 |
Show 45 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | VAL** | 3.2_via_mounting | 3.2 hole |
| 2 | GDH02S04 SW TE Connectivity | Switch_2way | SW1, SW2 |
| 1 | VAL** | Via5.3 | Via5.3 |
| 1 | 8150206RL TS4148 TAIWAN SEMICONDUCTOR | D_SM0805 | D1 |
| 1 | VS-20BQ030TRPBF 20BQ030 Vishay Semiconductor Diodes Division | D_SMB | D2 |
| 4 | HSMG-C190 LED Avago Technologies US Inc. | LD_0603 | D3, D4, D5, D6 |
| 1 | MMZ1005S601C FB_600OHM@100MHZ TDK Corporation | R_SM0402 | FB1 |
| 1 | MMZ2012Y600B FB_60OHM@100MHZ TDK Corporation | R_SM0805 | FB2 |
| 1 | XAL6060-223MEB 22UH_XAL60XX_SERIES Coilcraft | XAL60xx_series | L1 |
| 8 | C1608Y5V1H104Z 100n_C_SM0603 TDK Corporation | C_SM0603 | C1, C2, C3, C4, C5, C6, C7, C8 |
| 1 | C1608X5R1H334K080AB 0.33UF_0603 TDK Corporation | C_SM0603 | C9 |
| 3 | C1608X5R0J106M080AB 10UF_0603 TDK Corporation | C_SM0603 | C10, C17, C37 |
| 1 | CGJ2B2X7R1C223K050BA 22NF_0402 TDK Corporation | C_SM0402 | C11 |
| 6 | C1005C0G1H220J050BA 22PF_0402 TDK Corporation | C_SM0402 | C12, C25, C26, C27, C33, C34 |
| 1 | C2012X5R0J226M125AC 22UF_0805 TDK Corporation | C_SM0805 | C13 |
| 1 | C1005X7R1H222K050BA 2.2NF_0402 TDK Corporation | C_SM0402 | C14 |
| 2 | C2012X7R1C105K125AA 1uF_C_SM0805 TDK Corporation | C_SM0805 | C15, C16 |
| 3 | CC0402ZRY5V5BB105 1UF_0402 Yageo | C_SM0402 | C18, C28, C31 |
| 6 | CC0402KRX7R7BB103 10NF_0402 Yageo | C_SM0402 | C19, C20, C21, C22, C23, C29 |
| 1 | C1005C0G1H221J050BA 220PF_0402 TDK Corporation | C_SM0402 | C24 |
| 7 | C0402C104K8PACTU 100NF_0402 KEMET | C_SM0402 | C30, C32, C35, C36, C38, C39, C40 |
| 1 | CC0402MRX5R5BB225 2.2UF_0402 Yageo | C_SM0402 | C41 |
| 3 | RC0603JR-072K2L 2K2_0603 Yageo | SM0603 | R1, R12, R13 |
| 5 | RC0603JR-070RL 0R_0603 Yageo | SM0603 | R2, R8, R9, R10, R11 |
| 3 | RC0402JR-07330RL 330R_0402 Yageo | R_SM0402 | R3, R38, R65 |
| 6 | RC0402FR-0722RL 22R_0402 Yageo | R_SM0402 | R4, R6, R28, R32, R45, R49 |
| 1 | RC0603JR-070RL 0R_0603_NF Yageo | SM0603 | R5 |
| 3 | RC0402JR-0710KL 10K_0402 Yageo | R_SM0402 | R7, R37, R40 |
| 21 | RC0402JR-070RL 0R_0402 Yageo | R_SM0402 | R14, R58, R59, R60, R61, R62, R63, R64 +13 |
| 1 | RC0402FR-0722K1L 22K1_0402 Yageo | R_SM0402 | R15 |
| 1 | RC0402FR-0728KL 28K_0402 Yageo | R_SM0402 | R16 |
| 1 | ERA-2AEB1582X 15K8_0402 Panasonic Electronic Components | R_SM0402 | R17 |
| 1 | RC0402FR-075K49L 5K49_0402 Yageo | R_SM0402 | R18 |
| 1 | MMZ2012Y600B FR_0805 TDK Corporation | R_SM0805 | R19 |
| 5 | ERA-2AED471X 470R_0402 Panasonic Electronic Components | R_SM0402 | R20, R21, R23, R35, R36 |
| 18 | RC0402JR-070RL 0R_0402_NF Yageo | R_SM0402 | R22, R24, R39, R52, R53, R54, R55, R56 +10 |
| 12 | YC124-JR-0722RL RA Yageo | R_array | R25, R26, R27, R29, R30, R31, R42, R43 +4 |
| 1 | RC0402JR-0710RL 10R_0402 Yageo | R_SM0402 | R33 |
| 1 | RC0402FR-071KL 1K_0402 Yageo | R_SM0402 | R34 |
| 1 | RC0805JR-070RL 0R_0805_NF Yageo | R_SM0805 | R41 |
| 1 | RC0603FR-07100KL 100K_0603 Yageo | SM0603 | R50 |
| 1 | RC0402FR-0733KL 33K_0402 Yageo | R_SM0402 | R51 |
| 2 | RC0402FR-0747KL 47K_0402 Yageo | R_SM0402 | R66, R67 |
| 1 | ERA-2AEB2320X 232R_0402 Panasonic Electronic Components | R_SM0402 | R82 |
| 1 | RC0402FR-07100RL 100R_0402 Yageo | R_SM0402 | R83 |
Zipper v.2 design files
The KiCad project lives in the myriadrf/reference-development-kit repository on GitHub; these links point at the commit this page was built from.
Zipper v.2: common questions
What microcontroller does the Zipper v.2 use?
The Zipper v.2 is built around the AT90USB162-16MU, from the AVR/Arduino family.
How big is the Zipper v.2 PCB?
The Zipper v.2 measures 107 × 78 mm, has 6 copper layers and is 1.6 mm thick.
How many components are on the Zipper v.2?
172 components, from 65 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Zipper v.2 design files?
From the myriadrf/reference-development-kit repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.
Can I use the Zipper v.2 design in my own project?
The repository has no license, so all rights stay with myriadrf. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Zipper v.2 without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.
More boards in reference-development-kit
Similar boards
AVR/Arduino
Magspoof
samyk
35 × 29 mm11 parts2LNo license4.2kAVR/Arduino
Redox keyboard
mattdibi
162.2 × 126.5 mm77 parts2LMIT2.0kAVR/Arduino
Labrador
espotek-org
36.8 × 34.7 mm75 parts2LNo license1.2kAVR/Arduino
ModuleV450
stuartpittaway
30 × 61.4 mm39 parts2LCC-BY-NC-4.01.1kAVR/Arduino
V4
stuartpittaway
30 × 50 mm38 parts2LCC-BY-NC-4.01.1kAVR/Arduino
Discipline
coseyfannitutti
304.9 × 122.8 mm170 parts2LCC-BY-NC-4.01.0k