34 open source boards using the SN74LVC1G04DBVR
Real designs built with the SN74LVC1G04DBVR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
RASDR
myriadrf
59 × 62 mm250 parts6LNo license62STM32
LMS8001 App
myriadrf
60 × 60 mm282 partsNo license49QPCR-main
hisashin
100 × 94.8 mm92 parts2LGPL-3.047Cbm micropet
fachat
190.2 × 100.3 mm183 parts2LGPL-3.010ESP32
RadioNoob
EIectron
141.8 × 151.4 mm181 parts2LNo license8STM32
R2RDAC2026 REVIZE II
ERDALECE
246 × 120 mm919 parts6LGPL-3.05840AV-Stealth-ATX
croissantking
156.9 × 147.6 mm22 parts2LCC-BY-NC-4.03Shim amplifier, control
stockmann-lab
343.3 × 120 mm1003 parts4LNo license2FPGA
Project byte hamr
robertrico
97.6 × 74.8 mm91 parts4LMIT2STM32
Hub
Bruhdows
148 × 78 mm309 parts4LNo license1Qsbc zero
qfreiman
80 × 80 mm235 parts4LGPL-3.01STM32
Cc glasses
noahzhy
152.3 × 72 mm153 parts4LMIT1ESP32 Interface
dennowiggle
100 × 79 mm59 parts4LLGPL-2.11Pixel-Badge
zgeez
118 × 76 mm1202 parts4LMIT0ESP32
Glove v4-routing candidate
latintzar
100 × 80 mm561 parts8LMIT0Project ATO / Supervision
pratham-cloud-ctrl
300 × 250 mm479 parts4LCustom license0STM32
Sjc
tgiacomellibr
160 × 115 mm323 parts4LMIT0Av board cb
bryfur
100 × 100 mm300 parts4LNo license0ESP32
Custom round pcb led flash
xmyoot
84 × 84 mm224 parts4LNo license0RP2040/RP2350
MatrixDrive
Matrixite
100 × 65 mm143 parts8LNo license0Crab robot
triluongmh-byte
110 × 80 mm113 parts4LNo license0- schematic only · 1352 partsSTM32
Mira
max-talanov
1352 parts2LMIT0 UMyriad7002-append
myriadrf
112.1 × 41.4 mm196 parts8LNo license49Raspberry Pi
Main pcb 2025
matthieuvigne
56 × 65.6 mm69 parts4LGPL-3.05ESP32
Glove v4-placement
latintzar
100 × 80 mm560 parts6LMIT0Av board ca
bryfur
130 × 100 mm276 parts4LNo license0Project ATO / Current Driver
pratham-cloud-ctrl
175 × 155 mm156 parts4LCustom license0UMyriad7002
myriadrf
59.3 × 41.4 mm177 parts8LNo license49AVR/Arduino
Zipper v.2
myriadrf
107 × 78 mm172 parts6LNo license49Microchip SAM
Mini biped robot
mrcha033
50 × 30 mm32 parts2LApache-2.02Av board b
bryfur
94.6 × 69.4 mm230 parts4LNo license0Project ATO / Contact Router
pratham-cloud-ctrl
175 × 155 mm155 parts4LCustom license0Project ATO / Recording Front End
pratham-cloud-ctrl
155 × 190 mm153 parts4LCustom license0ESP32
ARDF-TX UNIVERSAL CONTROLLER
DD1SB
100 × 100 mm197 parts2LMIT0
How designs wire the SN74LVC1G04DBVR
Read from the KiCad layouts of 24 open source designs, one per repository: what each pin of the SN74LVC1G04DBVR connects to, and the resistors, capacitors and other passives placed on it.
- The VCC pin has a decoupling capacitor on 16 of 23 designs, most often 100 nF (then 1 µF).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| NCpin 1 | Connected to: Not connected 92% | — |
| GNDpin 3 | Connected to: GND 83% · a signal 17% | — |
| VCCpin 5 | Connected to: 3.3V 65% · a signal 35% |
|
2 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include RASDR by myriadrf, LMS8001 App by myriadrf, QPCR-main by hisashin and Cbm micropet by fachat.
The SN74LVC1G04DBVR in open source designs
The gallery holds 34 open source boards using the SN74LVC1G04DBVR from 25 GitHub repositories; a typical one measures about 107 × 80 mm and carries around 197 components.
79% use four copper layers or more, and 44% carry an open source license.
The most starred is RASDR by myriadrf.
Parts used alongside the SN74LVC1G04DBVR
Microcontrollers on boards using the SN74LVC1G04DBVR
What boards using the SN74LVC1G04DBVR are built for
SN74LVC1G04DBVR: common questions
Where can I find a SN74LVC1G04DBVR reference design?
Each of the 34 boards on this page is a real design using the SN74LVC1G04DBVR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the SN74LVC1G04DBVR VCC pin?
The VCC pin has a decoupling capacitor on 16 of 23 designs, most often 100 nF (then 1 µF). Counted from the KiCad layouts of 24 open source designs using the SN74LVC1G04DBVR.
What parts are used alongside the SN74LVC1G04DBVR?
The SN74LVC1G08DBVR, SN74LVC1G32DBVR, SN74LVC1G125DBVR, SN74LVC8T245PWR and USBLC6-2SC6 appear in the most repositories here.
Which microcontrollers do boards using the SN74LVC1G04DBVR use?
Most are built on STM32 (6), ESP32 (5), AVR/Arduino (1) and RP2040/RP2350 (1).
How big is a typical board using the SN74LVC1G04DBVR?
The median is 107 × 80 mm, and 21% are two-layer designs.
What is the most popular open source board using the SN74LVC1G04DBVR?
By GitHub stars, RASDR by myriadrf, with 62 stars.
Can I simulate one of these boards using the SN74LVC1G04DBVR before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.