SolarCharger
n0skill·SolarCharger
About the SolarCharger PCB
SolarCharger is an open source PCB design by n0skill, published on GitHub. It is a 2-layer board measuring 41 × 33 mm, with 33 components from 27 distinct parts.
Other key parts include the BQ25185 and TPS61230DRC. By type, the board carries 10 resistors, 9 connectors, 6 capacitors, 2 ICs, 2 LEDs and 1 switch.
It belongs with the power & battery designs in this gallery.
From the project
A wide(r) voltage and current range solar panel LiPo Charger
��# SolarCharger   This is a Lithium Ion / Lithium Polymer chemistry battery (4.2V) solar…
Main components on the SolarCharger
SolarCharger bill of materials (BOM)
33 components, 27 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | BQ25185 | WSON-10-1EP_2.5x2.5mm_P0.5mm_EP1.2x2mm | U1 |
| 1 | TPS61230DRC | Texas_S-PVSON-N10_ThermalVias | U2 |
| 1 | SOLAR | JST_PH_B2B-PH-K_1x02_P2.00mm_Vertical | J1 |
| 1 | LOAD | JST_PH_B2B-PH-K_1x02_P2.00mm_Vertical | J2 |
| 2 | Conn_01x02_Pin | JST_PH_B2B-PH-K_1x02_P2.00mm_Vertical | J3, J8 |
| 1 | LOAD | TerminalBlock_Phoenix_MPT-0,5-2-2.54_1x02_P2.54mm_Horizontal | J4 |
| 1 | USB_A | USB_Micro-B_Molex-105017-0001 | J5 |
| 2 | Conn_01x02_Pin | TerminalBlock_Phoenix_MPT-0,5-2-2.54_1x02_P2.54mm_Horizontal | J6, J9 |
| 1 | SOLAR | TerminalBlock_Phoenix_MPT-0,5-2-2.54_1x02_P2.54mm_Horizontal | J7 |
| 2 | SolderJumper_2_Open | SolderJumper-2_P1.3mm_Open_Pad1.0x1.5mm | 500mA_4.2v1, 1100mA_4.2v1 |
| 1 | SW_Push | SW_PUSH_6mm | SW1 |
| 2 | LED | LED_1206_3216Metric_Pad1.42x1.75mm_HandSolder | DS1, DS2 |
| 1 | 1uH | L_Coilcraft_XxL4020 | L1-XFL4020-102MEB1 |
| 1 | 1 uF | C_0805_2012Metric | C1 |
| 1 | 10uF | C_0805_2012Metric | C2 |
| 1 | 22 nF | C_0805_2012Metric | C3 |
| 1 | 10nF | C_0805_2012Metric | C4 |
| 1 | 22 uF | C_0805_2012Metric | C5 |
| 1 | 1uF | C_0805_2012Metric | C6 |
| 1 | 13 Kohm | R_1206_3216Metric | R1 |
Show 7 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 18 Kohm | R_1206_3216Metric | R2 |
| 2 | 600 ohm | R_1206_3216Metric | R3, R11 |
| 1 | 230K | R_1206_3216Metric | R4 |
| 1 | 1M | R_1206_3216Metric | R5 |
| 1 | 402k | R_1206_3216Metric | R6 |
| 1 | 100k | R_1206_3216Metric | R7 |
| 2 | 2.2k | R_1206_3216Metric | R8, R9 |
SolarCharger design files
The KiCad project lives in the n0skill/SolarCharger repository on GitHub; these links point at the commit this page was built from.
- Layoutflowsense_charger.kicad_pcb
- Schematicflowsense_charger.kicad_sch
SolarCharger: common questions
How big is the SolarCharger PCB?
The SolarCharger measures 41 × 33 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the SolarCharger?
33 components, from 27 distinct parts. The full bill of materials is listed on this page.
Where can I download the SolarCharger design files?
From the n0skill/SolarCharger repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the SolarCharger design in my own project?
The repository has no license, so all rights stay with n0skill. Use it as a reference, and ask the author before reusing the design.
Similar boards
EinkPDA screen
TalismanDesign
95 × 54 mm27 parts2LApache-2.02.0kStack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7kDisplay Carrier
AxxAxx
35.6 × 58.2 mm5 parts2LGPL-3.01.7kProgrammingAdapter
stuartpittaway
10.5 × 83 mm3 parts2LCC-BY-NC-4.01.1kTemperaturePCB PANEL
stuartpittaway
116 × 75.5 mm178 parts2LCC-BY-NC-4.01.1kModule 16S PassiveBalanceAddOn
stuartpittaway
61 × 74 mm86 parts2LCC-BY-NC-4.01.1k