6 open source boards using the BQ25185

Real designs built with the BQ25185, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

6 boardsClear filters|Most starred

How designs wire the BQ25185

Read from the KiCad layouts of 6 open source designs, one per repository: what each pin of the BQ25185 connects to, and the resistors, capacitors and other passives placed on it.

  • The SYS pin has a capacitor to GND on 6 of 6 designs, most often 10 µF (then 1 µF).
  • The BAT pin has a capacitor to GND on 6 of 6 designs, most often 1 µF.
  • The ISET pin has a resistor to GND on 6 of 6 designs, most often 600 Ω (then 300 Ω).
  • The SYS pin has a series resistor on 5 of 6 designs, most often 1 MΩ (then 100 kΩ).
SYSpin 1Connected to: APX803L05-32SA-7 50%, HE9073A30MR 33% · VCC 17%
  • Capacitor to GND on 100% · 10 µF (5), 1 µF (3), 4.7 µF (2)
  • Series resistor on 83% · 1 MΩ (3), 100 kΩ (2), 0 Ω (1)
BATpin 2Connected to: A connector 67% · BATT 33%
  • Capacitor to GND on 100% · 1 µF (5)
STAT2pin 3Connected to: Signal 83% · not connected 17%
  • Series resistor on 33% · 470 Ω (1), 150 Ω (1)
/CE_4pin 4Connected to: GND 67% · a signal 33%
GNDpin 5Connected to: GND 100%
TS/MRpin 6Connected to: A connector 33%
  • Resistor to GND on 33%
ILIM/VSETpin 7Connected to: Signal 100%
  • Resistor to GND on 83% · 100 kΩ (3), 2.4 kΩ (1), 13 kΩ (1)
ISETpin 8Connected to: Signal 100%
  • Resistor to GND on 100% · 600 Ω (2), 300 Ω (2), 375 Ω (1)
STAT1pin 9Connected to: Signal 83% · not connected 17%
  • Series resistor on 50% · 470 Ω (1), 2.2 kΩ (1), 90.9 Ω (1)
INpin 10Connected to: VBUS 67% · a signal 33%
GND_11pin 11Connected to: GND 83% · not connected 17%

Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include SolarMeshtasticNode by h0lad, SolarMeshtasticNodeMini by h0lad, Stm32 bluet pill by brendose and SolarLoRaBox by h0lad.

The BQ25185 in open source designs

The gallery holds 6 open source boards using the BQ25185 from 6 GitHub repositories; a typical one measures about 50.2 × 61 mm and carries around 41 components.

67% use four copper layers or more, and 33% carry an open source license.

The most starred is SolarMeshtasticNode by h0lad.

Microcontrollers on boards using the BQ25185

What boards using the BQ25185 are built for

BQ25185: common questions

Where can I find a BQ25185 reference design?

Each of the 6 boards on this page is a real design using the BQ25185. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

How is the BQ25185 SYS pin connected?

The SYS pin has a capacitor to GND on 6 of 6 designs, most often 10 µF (then 1 µF). Counted from the KiCad layouts of 6 open source designs using the BQ25185.

How is the BQ25185 BAT pin connected?

The BAT pin has a capacitor to GND on 6 of 6 designs, most often 1 µF. Counted from the KiCad layouts of 6 open source designs using the BQ25185.

What resistor goes on the BQ25185 ISET pin?

The ISET pin has a resistor to GND on 6 of 6 designs, most often 600 Ω (then 300 Ω). Counted from the KiCad layouts of 6 open source designs using the BQ25185.

What parts are used alongside the BQ25185?

The APX803L05-32SA-7, HE9073A30MR, SS26_C5350986, HT-CT62 and TPS22917DBV appear in the most repositories here.

Which microcontrollers do boards using the BQ25185 use?

Most are built on STM32 (2).

How big is a typical board using the BQ25185?

The median is 50.2 × 61 mm, and 33% are two-layer designs.

What is the most popular open source board using the BQ25185?

By GitHub stars, SolarMeshtasticNode by h0lad, with 38 stars.

Can I simulate one of these boards using the BQ25185 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part