HardLabs

Codedeck

Nag112·codedeck·hardware/kicad/codedeck.kicad_sch

This repository ships a schematic but no board layout.

About the Codedeck PCB

Codedeck is an open source ESP32 PCB design by Nag112, published on GitHub under the MIT license. It is a board, with 1 components from 1 distinct parts.

Its main chip is the ESP32-S3-WROOM-1, from the ESP32 family.

From the project

Open-source 12-key ESP32 Stream Deck for VS Code — firmware, PCB, macOS companion with USB OTA, and VS Code extension.

Open-source 12-key (or 9-key) Stream Deck–style keypad for Visual Studio Code. ESP32 firmware reads 2-pin keyboard switches, a macOS companion maps those keys and updates firmware over USB, and a VS Code extension runs the real editor commands.

The default 3×4 map is the VS Code actions people hit all day on macOS: Command Palette, Quick Open, terminal, sidebar, format, go to definition, find in files, source control, toggle comment, split editor, quick fix, and start debug. Every key is editable in the Mac app.

Main components on the Codedeck

ESP32-S3-WROOM-1

Codedeck bill of materials (BOM)

1 components, 1 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
ESP32-S3-WROOM-1
U1

Codedeck design files

The KiCad project lives in the Nag112/codedeck repository on GitHub; these links point at the commit this page was built from.

Codedeck: common questions

What microcontroller does the Codedeck use?

The Codedeck is built around the ESP32-S3-WROOM-1, from the ESP32 family.

How many components are on the Codedeck?

1 components, from 1 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Codedeck design files?

From the Nag112/codedeck repository on GitHub, which has the schematic and the BOM; the links under Design files point to each one.

Can I use the Codedeck design in my own project?

Yes, under the terms of its MIT license, which Nag112 chose for the repository.

Can I test firmware for the Codedeck without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

Similar boards