Data Interconnect revA2
nanographs·Open-Beam-Interface·Hardware/PCBs/Data Interconnect/Data Interconnect revA2/Data Interconnect revA2.kicad_pcb
About the Data Interconnect revA2 PCB
Data Interconnect revA2 is an open source PCB design by nanographs, published on GitHub. It is a 4-layer board measuring 40.3 × 80 mm, with 19 components from 11 distinct parts.
By type, the board carries 6 capacitors, 6 resistors, 5 connectors and 2 jumpers.
From the project
Just what you need to control the beam and get an image.
Just what you need to control the beam and get an image.
Glasgow makes getting bytes in and out of the FPGA over USB radically more accessible. We use that to make getting data into and out of your microscope radically more accessible.
- [X] Order and test rev 1 PCBs (Design not uploaded, required significant rework) - [X] Capture 16,384 x 16,384 images - [X] Live viewer fast enough to focus and stigmate with - [X] Raster pattern mode at 16,384 x 16,384 image resolution, with 8-bit grayscale dwell times - [X] Order and test V1.0 PCBs - [x] Refactor gateware to support 16-bit grayscale…
Data Interconnect revA2 bill of materials (BOM)
19 components, 11 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | CONN_01X04_SHIELDED Conn_02x22_Odd_Even | PinReceptacle_2x22_P1.27mm_Vertical_BackSide_SMD | J1 |
| 3 | CONN_02X10_ODD_EVEN Conn_02x10_Odd_Even | IDC-Header_Receptacle_2x10_P2.54mm_Vertical_No_Pin_1_Mark | J2, J3, J4 |
| 1 | ARF1691 Conn_01x02_Pin | PinSocket_1x02_P2.54mm_Vertical | J5 |
| 2 | Jumper_2_Open | R_0603_1608Metric | JP1, JP2 |
| 2 | 10U 0.1uF | C_0603_1608Metric | C1, C2 |
| 3 | 4.7U 4.7uF | C_1206_3216Metric | C3, C4, C6 |
| 1 | 4.7U 0.1uF | C_0603_1608Metric | C5 |
| 1 | 33K R | R_0603_1608Metric | R1 |
| 1 | 140K R | R_0603_1608Metric | R2 |
| 1 | 66.5 R | R_0603_1608Metric | R3 |
| 3 | R_Pack08 | RES_EXB2HV | RN1, RN2, RN3 |
Data Interconnect revA2 design files
The KiCad project lives in the nanographs/Open-Beam-Interface repository on GitHub; these links point at the commit this page was built from.
Data Interconnect revA2: common questions
How big is the Data Interconnect revA2 PCB?
The Data Interconnect revA2 measures 40.3 × 80 mm, has 4 copper layers and is 1.567 mm thick.
How many components are on the Data Interconnect revA2?
19 components, from 11 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Data Interconnect revA2 design files?
From the nanographs/Open-Beam-Interface repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Data Interconnect revA2 design in my own project?
The repository has no license, so all rights stay with nanographs. Use it as a reference, and ask the author before reusing the design.
More boards in Open-Beam-Interface
Open Beam Interface
nanographs
100 × 80 mm282 parts4LNo license371Beam Offset Switch
nanographs
50 × 42 mm29 parts4LNo license371OBI Data Interconnect
nanographs
40.3 × 80 mm19 parts4LNo license371DB9 High-Low Signal Generator
nanographs
47 × 30 mm10 parts2LNo license371Generic Scan Selector
nanographs
30 × 38 mm9 parts2LNo license371DB9 Differential Signal Selector
nanographs
55 × 72 mm7 parts4LNo license371Digital IO Breakout
nanographs
28 × 80 mm6 parts2LNo license371DSC DB9 Splitter
nanographs
28 × 70 mm6 parts4LNo license371DSC Scan Selector
nanographs
64 × 46.5 mm5 parts4LNo license371