OBI Data Interconnect
nanographs·Open-Beam-Interface·Hardware/PCBs/Data Interconnect/OBI Data Interconnect.kicad_pcb
About the OBI Data Interconnect PCB
OBI Data Interconnect is an open source PCB design by nanographs, published on GitHub. It is a 4-layer board measuring 40.3 × 80 mm, with 19 components from 9 distinct parts.
By type, the board carries 6 capacitors, 6 resistors, 5 connectors and 2 jumpers.
From the project
Just what you need to control the beam and get an image.
Just what you need to control the beam and get an image.
Glasgow makes getting bytes in and out of the FPGA over USB radically more accessible. We use that to make getting data into and out of your microscope radically more accessible.
- [X] Order and test rev 1 PCBs (Design not uploaded, required significant rework) - [X] Capture 16,384 x 16,384 images - [X] Live viewer fast enough to focus and stigmate with - [X] Raster pattern mode at 16,384 x 16,384 image resolution, with 8-bit grayscale dwell times - [X] Order and test V1.0 PCBs - [x] Refactor gateware to support 16-bit grayscale…
OBI Data Interconnect bill of materials (BOM)
19 components, 9 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | CONN_02X22_ODD_EVEN Conn_02x22_Odd_Even | PinReceptacle_2x22_P1.27mm_Vertical_BackSide_SMD | J1 |
| 3 | CONN_02X10_ODD_EVEN Conn_02x10_Odd_Even | IDC-Header_Receptacle_2x10_P2.54mm_Vertical_No_Pin_1_Mark | J2, J3, J4 |
| 1 | Conn_01x02_Pin | PinSocket_1x02_P2.54mm_Vertical | J5 |
| 1 | JUMPER_2_OPEN Jumper_2_Open | R_0603_1608Metric | JP1 |
| 1 | Jumper_2_Open | R_0603_1608Metric | JP2 |
| 3 | 0.1UF 0.1uF | C_0603_1608Metric | C1, C2, C5 |
| 3 | 4.7UF 4.7uF | C_1206_3216Metric | C3, C4, C6 |
| 3 | R | R_0603_1608Metric | R1, R2, R3 |
| 3 | R_PACK08 R_Pack08 | RES_EXB2HV | RN1, RN2, RN3 |
OBI Data Interconnect design files
The KiCad project lives in the nanographs/Open-Beam-Interface repository on GitHub; these links point at the commit this page was built from.
OBI Data Interconnect: common questions
How big is the OBI Data Interconnect PCB?
The OBI Data Interconnect measures 40.3 × 80 mm, has 4 copper layers and is 1.567 mm thick.
How many components are on the OBI Data Interconnect?
19 components, from 9 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the OBI Data Interconnect design files?
From the nanographs/Open-Beam-Interface repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the OBI Data Interconnect design in my own project?
The repository has no license, so all rights stay with nanographs. Use it as a reference, and ask the author before reusing the design.
More boards in Open-Beam-Interface
Open Beam Interface
nanographs
100 × 80 mm282 parts4LNo license371Beam Offset Switch
nanographs
50 × 42 mm29 parts4LNo license371Data Interconnect revA2
nanographs
40.3 × 80 mm19 parts4LNo license371DB9 High-Low Signal Generator
nanographs
47 × 30 mm10 parts2LNo license371Generic Scan Selector
nanographs
30 × 38 mm9 parts2LNo license371DB9 Differential Signal Selector
nanographs
55 × 72 mm7 parts4LNo license371Digital IO Breakout
nanographs
28 × 80 mm6 parts2LNo license371DSC DB9 Splitter
nanographs
28 × 70 mm6 parts4LNo license371DSC Scan Selector
nanographs
64 × 46.5 mm5 parts4LNo license371