Digital IO Breakout

nanographs·Open-Beam-Interface·Hardware/PCBs/Digital IO Breakout/revA1/Digital IO Breakout/Digital IO Breakout.kicad_pcb

Digital IO Breakout layout, top view — open source board by nanographs

About the Digital IO Breakout

Digital IO Breakout is an open source PCB design by nanographs, published on GitHub. It is a 2-layer board measuring 28 × 80 mm, with 6 components from 3 distinct parts.

It belongs with the dev boards & breakouts designs in this gallery.

From the project

Just what you need to control the beam and get an image.

Just what you need to control the beam and get an image.

Glasgow makes getting bytes in and out of the FPGA over USB radically more accessible. We use that to make getting data into and out of your microscope radically more accessible.

- [X] Order and test rev 1 PCBs (Design not uploaded, required significant rework) - [X] Capture 16,384 x 16,384 images - [X] Live viewer fast enough to focus and stigmate with - [X] Raster pattern mode at 16,384 x 16,384 image resolution, with 8-bit grayscale dwell times - [X] Order and test V1.0 PCBs - [x] Refactor gateware to support 16-bit grayscale…

Digital IO Breakout bill of materials (BOM)

6 components, 3 distinct parts — part numbers from the project's BOM.

QtyPartRefs
4
M8_CONN_01X03_SOCKET_SHIELDED
M8_conn_01x03_Socket_Shielded
J1, J2, J3, J4
1
CONN_02X10_ODD_EVEN
Conn_02x10_Odd_Even
J5
1
CONN_01X03_SOCKET
Conn_01x03_Socket
J6

Digital IO Breakout design files

The KiCad project lives in the nanographs/Open-Beam-Interface repository on GitHub; these links point at the commit this page was built from.

Digital IO Breakout: common questions

How big is the Digital IO Breakout?

The Digital IO Breakout measures 28 × 80 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Digital IO Breakout?

6 components, from 3 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Digital IO Breakout design files?

From the nanographs/Open-Beam-Interface repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Digital IO Breakout design in my own project?

The repository has no license, so all rights stay with nanographs. Use it as a reference, and ask the author before reusing the design.

More boards in Open-Beam-Interface

Similar boards